LED Indication
You can see the status of RoboVac from the LED
indicators.
(Jand0
Status
Pu lsing blue
Charging
Solid
blue
Standby/
Cleaning/
Fully
charged
Solid red
Low power and returning to auto empty station
•
RoboVac is
off.
Off
•
To conserve power, the light automatically turns
off when RoboVac is not docked to the auto empty
station
and has been inactive for 10 minutes.
Flashing blue
Waiting for Wi-Fi
connection
RoboVac has an error.
Flashing red with voice alert
Refer to the
"Troubleshooting> Voice
Alert"
section in
this manual for solutions.
Map Navigation and Management
Navigation
Once RoboVac starts to auto clean, it will move away from the auto empty station and
automatically scan your house to generate maps,
intelligent
ly determine its cleaning route,
and divide the space into zones. The cleaning paths are planned along the walls, following
a Z-shaped cleaning method to clean one zone at a t ime.
- -
-- -- - ---- -
--- -- - --
-- --- -- --- - --- -
-.-
--- - --- - --- -- - -- - - --- -
---- - --- - -
----
14EN