Table of Contents
Advertisement
Clean the Rolling Brush
Pull on the release tabs to unlock the brush guard as shown.
1
2
Lift the rolling brush to remove.
3
Clean the rolling brush with the cleaning tool.
4
Reinstall the rolling brush by inserting the fixed protruding end first.
5
Press down to snap the brush guard into place.
1
4
Clean the Side Brushes
Foreign substances, such as hair, can easily get tangled in the side brushes, and dirt
may adhere to them. Be sure to clean them regularly.
1
Remove the side brushes.
30
2
3
5
2
Carefully unwind and pull off any hair or string that is wrapped between the main
unit and the side brushes.
3
Use a cloth dampened with warm water to remove dust from the brushes or to
gently reshape them.
• Only use the side brushes when they are completely dry.
Replace the Side Brushes
The side brushes may become damaged after being used for a period of time. Follow
the instructions below to replace them.
• Pull off the old side brushes and snap the new ones into place until you hear a click.
• Make sure the left side brush marked with an L (Left) and the right side
brush marked with an R (right) are installed correctly, as illustrated.
Otherwise, the side brushes may be damaged.
31
Advertisement
Table of Contents
