Table of Contents
Advertisement
Under certain unusual conditions of prolonged non-use and/or exposure to
high temperatures, the HDD/SSD might be vulnerable to data retention
errors.
Legal Footnote (Internal Storage Drive Capacity)
For more information regarding Internal Storage Drive Capacity, refer to the
Legal Footnotes
RTC battery
Power Condition Descriptions
The computer operating capability and battery charge status are affected
by different power conditions, including whether an AC adaptor is
connected and what the battery charge level is.
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
Flashing Amber
Amber
White
Flashing White
No light
If the battery pack becomes too hot while it is being charged, the charge
stops and the DC IN/Battery indicator goes out. When the temperature of
the battery pack falls to a normal range, charging will resume. This process
occurs regardless of whether the computer's power is on or off.
User's Manual
section.
The internal RTC battery backs up the Real-Time
Clock (RTC) and calendar.
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Indicates that the AC adaptor is connected and
the battery is charging.
Indicates that the AC adaptor is connected and
the battery is fully charged.
Indicates a problem with the computer.
Disconnect the AC adaptor for several seconds,
and remove the battery. Then reinstall the battery
and reconnect the AC adaptor. After that, press
the power button. If it still does not operate
properly, you should contact your reseller or
dealer.
Under any other conditions, the indicator does
not light.
3-23
Advertisement
Table of Contents
