Table of Contents
Advertisement
When writing or rewriting
Observe the following points while you write or rewrite data to a media:
CyberLink PowerDVD 14 DVD for TOSHIBA
Be aware of the following limitations when you use the CyberLink
PowerDVD 14 DVD for TOSHIBA:
Notes on use
User's Manual
Some types and formats of DVD-R DL and DVD+R DL discs might be
unreadable.
Disc created in DVD-R DL format4 (Layer Jump Recording) cannot be
read.
Always copy data from the internal storage drive to the optical media.
Do not use the cut-and-paste function as the original data will be lost if
there is a write error.
Do not perform any of the following actions:
Change users in the Operating Systems.
Operate the computer for any other function, including such tasks
as using a mouse or Touch Pad, or closing/opening the display
panel.
Start a communication application.
Apply impact or vibration to the computer.
Install, remove or connect external devices, including such items
as a memory media card, USB device, external monitor or an
optical digital device.
Use the audio/video control button to reproduce music or voice.
Open the optical disc drive.
Do not use shut down, log off, Sleep Mode or Hibernation Mode
functions while writing or rewriting.
Make sure that the write/rewrite operation is completed before going
into either Sleep Mode or Hibernation Mode (You can remove an
optical media on the optical disc drive after writing is completed).
If the media is of poor quality, or is dirty or damaged, writing or
rewriting errors might occur.
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. In addition, do not use the
computer on an unstable surface such as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
This software can only be used on Windows operating system.
CyberLink PowerDVD 14 DVD for TOSHIBA is only provided with
models configured with a DVD Super Multi drive.
4-15
Advertisement
Table of Contents
