Installing A Cabled Drive Into The Drive Carrier - Dell EMC PowerEdge R240 Installation And Service Manual

Figure 31. Removing the cabled drive from the drive carrier
Next steps
1. Install the drive into the drive

Installing a cabled drive into the drive carrier

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the front bezel.
Steps
1. Insert the drive into the drive carrier with the connector end of the drive toward the back of the drive carrier.
2. Align the screw holes on the drive with the screw holes on the drive carrier. When aligned correctly, the back of the drive is flush with
the back of the drive carrier.
3. Install the screws to secure the drive to the drive carrier.
Figure 32. Installing a cabled drive into the drive carrier
carrier.
Safety instructions.
Before working inside your system.
PowerEdge R240 installing and removing system components 53