Toyota HIGHLANDER HYBRID 2009 Manual page 517

STEP 4
Stowing the flat tire, jack and all tools
STEP 1
Remove the center wheel ornament by pushing from the
reverse side.
STEP 2
STEP 3
Turn the spare tire clamp bolt clockwise with a jack handle
and adapter socket until you hear a click.
STEP 4
Stow the jack and all tools.
5-2. Steps to take in an emergency
Firmly tighten each nut two or
three times in the order shown in
the illustration.
Tightening torque:
76 ft•lbf (103 N•m, 10.5 kgf•m)
Put the flat tire on the ground
with the outer side facing up and
install the holding bracket.
Be careful not to lose the wheel
ornament.
5
517