Toyota HIGHLANDER HYBRID 2009 Manual page 437

■
How to read oil container labels
Some oil containers are labeled with ILSAC certification marks that
help you to select the proper oil.
■
Engine oil consumption
●
The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
●
More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
●
A new engine consumes more oil.
●
When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accu-
rately.
●
Oil consumption: Max. 1.1 qt./600 miles, 0.9 lmp.qt./600 miles (1.0 L per
1000 km)
●
If your vehicle consume more than 1.1 qt. (1.0 L, 0.9 lmp.qt.) every 600
miles (1000 km), contact your Toyota dealer.
■
Changing the engine oil (U.S.A. only)
To reset the oil change system, follow the procedure below:
STEP 1
Set the "POWER" switch OFF with the trip meter A reading shown.
(→P. 189)
STEP 2
While pressing the trip meter reset button, set the "POWER" switch
in ON mode.
STEP 3
Continue to press and hold the button until "COMPLETE" appears
on the multi-information display.
4-3. Do-it-yourself maintenance
OIL identification mark
The ILSAC (International Lubri-
cant Standardization
Approval Committee) Certifica-
tion Mark is displayed on the
front of the container.
and
4
437