Page 1
TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Interior and Air conditioning and audio systems, as well as other in- exterior features terior features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
TABLE OF CONTENTS Index 1-6. Theft deterrent system..76 Before driving Engine immobilizer system ... 76 Theft prevention labels (U.S.A.)....... 78 1-1. Key information ....30 Keys ........30 1-7. Safety information ....79 Correct driving posture ..79 1-2. Opening, closing and SRS airbags ......
Page 3
2-4. Using other driving 3-2. Using the audio systems ......163 system......228 Cruise control...... 163 Audio system types .... 228 Rear view monitor system Using the radio ....231 (vehicles with auto anti-glare Using the CD player ... 237 inside rear view mirror) ..
Page 4
TABLE OF CONTENTS Index 3-5. Using the storage 4-2. Maintenance...... 343 features ......296 Maintenance requirements ....343 List of storage features..296 • Glove box ......296 General maintenance ..345 • Console boxes ....297 Emission inspection and •...
Page 5
5-2. Steps to take in an Index emergency....... 424 If a warning light turns on or a warning buzzer Abbreviation list......506 sounds......424 If you have a flat tire.... 433 Alphabetical index ....508 If the engine will not start ..449 If the shift lever cannot be What to do if...
Page 6
Pictorial index Exterior Regular Cab models Windshield wipers P. 160 Outside rear view mirrors P. 66 Hood P. 353 Parking and front side marker lights P. 157 Headlights P. 157 Front turn signal lights P. 147...
Page 7
∗ Back window P. 71 Rear turn signal lights P. 147 Fuel filler door P. 72 Stop/tail lights P. 157 Side doors P. 35 Tailgate P. 40 License plate lights P. 157 Tires Rotation P. 373 Replacement P. 433 Rear side marker lights P.
Page 8
Pictorial index Exterior Access Cab models Windshield wipers P. 160 Outside rear view mirrors P. 66 Hood P. 353 Parking and front side marker lights P. 157 Headlights P. 157 ∗ Fog lights P. 159 Front turn signal lights P. 147...
Page 9
∗ Rear turn signal Back window P. 71 lights P. 147 Fuel filler door P. 72 Stop/tail lights P. 157 Access doors P. 39 Side doors P. 35 Tailgate P. 40 License plate lights P. 157 Tires Rotation P. 373 Replacement P.
Page 10
Pictorial index Exterior Double Cab models Windshield wipers P. 160 Outside rear view mirrors P. 66 Hood P. 353 Parking and front side marker lights P. 157 Headlights P. 157 ∗ Fog lights P. 159 Front turn signal lights P. 147...
Page 11
∗ Back window P. 71 Rear turn signal Fuel filler door P. 72 lights P. 147 Side doors P. 35 Stop/tail lights P. 157 Tailgate P. 40 License plate lights P. 157 Rear side marker lights P. 157 Tires Rotation P.
Page 12
Pictorial index Interior Seat belts P. 56 ∗ Bottle holders P. 300 ∗ Head restraints P. 54 Front console box P. 297 SRS driver airbag P. 81 SRS front passenger airbag P. 81 ∗ Glove box P. 296 Rear seats P.
Page 13
∗ Accessory meter P. 156 ∗ Outside temperature display P. 308 ∗ Compass P. 332 ∗ Garage door opener box P. 328 ∗ Personal lights P. 295 ∗ Overhead console P. 304 Interior light P. 295 SRS curtain shield airbags P.
Page 14
Pictorial index Interior ∗ Door lock switch P. 36 Inside door lock button P. 36 ∗ Power window switches P. 69 ∗ Window lock switch P. 69...
Page 15
Bench type front seat Shift lever P. 141, 144 Cup holders P. 298 ∗ Shift lock override button P. 450 Separated type front seats with an automatic transmission Shift lever P. 141 Cup holders P. 298 Cup holders P. 298 Shift lock override button P.
Page 16
Pictorial index Interior Separated type front seats with a manual transmission Shift lever P. 144 Cup holders P. 298...
Page 17
Access Cab models ∗ Sub woofer P. 256 Back window ∗ lock release lever P. 71 Auxiliary boxes P. 302 Rear console box P. 297 ∗ : If equipped...
Page 18
Pictorial index Interior Double Cab models Grocery bag hooks P. 326 Back window lock ∗ Bottle holders P. 300 release lever P. 71 Flashlight holder P. 325 Storage boxes P. 324 ∗ Cargo net hooks P. 327 ∗ : If equipped ∗...
Pictorial index Instrument panel Gauges and meters P. 150 Tilt and telescopic steering lock release lever P. 62 Tire pressure warning reset switch P. 373 Hood lock release lever P. 353 ∗ Parking brake pedal P. 148 Auxiliary box P. 302 Bottle holders P.
Page 20
Pictorial index Instrument panel Passenger airbag Audio system P. 228 ∗ off switch P. 93 Air conditioning system P. 220 Front-wheel drive ∗ Emergency flasher switch control switch P. 170 ∗ A-TRAC switch P. 174 AUX adapter P. 257 Power outlet P.
Page 21
Windshield wipers and Engine (ignition) switch P. 138 washer switch P. 160 ∗ Parking brake lever P. 148 ∗ ∗ Audio remote control switches P. 259 Telephone switches P. 267 ∗ Talk switch P. 267 ∗ Cruise control switch P. 163 ∗...
Page 22
Pictorial index Instrument panel ∗ Fog light switch P. 159 ∗ RR DIFF LOCK switch P. 178 Instrument panel light control dial P. 151 Power outlet main ∗ switch P. 311 Headlight switch P. 157 Turn signal lever P. 147 RSCA OFF switch P.
Page 23
Pictorial index Luggage compartment Deck rails P. 195 Tie-down cleats P. 322 ∗ Power outlet P. 311 Auxiliary boxes P. 320 Deck hooks P. 321 ∗ : If equipped...
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 25
Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 26
CAUTION General precaution regarding children’s safety Never leave children unattended in the vehicle, and never allow children to have or use the key. Children may be able to start the vehicle or shift the vehicle into neutral. There is also a danger that children may injure themselves by playing with the cigarette lighter, the windows, or other features of the vehicle.
Page 27
This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 451)
Page 30
1-1. Key information NOTICE To prevent key damage (vehicles with engine immobilizer system) Do not subject the keys to strong shocks, expose them to high tempera- tures by placing them in direct sunlight, or get them wet. Do not expose the keys to electromagnetic materials or attach any mate- rial that blocks electromagnetic waves to the key surface.
1-2. Opening, closing and locking the doors Wireless remote control (if equipped) The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door.
Page 32
When a wireless key (that emits radio waves) is being used nearby When the wireless key has been left near an electrical appliance such as a personal computer Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control system) can be changed. (Customizable features →P. 493)
Page 33
1-2. Opening, closing and locking the doors Certification for wireless remote control MODEL/FCC IDs: Transmitter: GQ43VT20T Receiver: GQ43VT29R IC (Canada) IDs: Transmitter: 1470A-1T Receiver: 1470A-1R MADE IN U.S.A. This complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause...
1-2. Opening, closing and locking the doors Side doors The vehicle can be locked/unlocked using the wireless remote con- trol, key or door lock switch. Wireless remote control (if equipped) →P. 32 Regular Cab models Locks the door Unlocks the door Access Cab and Double Cab models Locks all doors Unlocks all doors...
Page 35
1-2. Opening, closing and locking the doors Door lock switch (if equipped) Driver’s door lock switch Locks all doors Unlocks all doors Passenger’s door lock switch Locks all doors Unlocks all doors Inside door lock button Locks the door Unlocks the door Pulling the inside handle can open the front door even if the inside door lock button is in the...
Page 36
1-2. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside door lock button to the lock position. Close the door. Vehicles with power door lock system The door cannot be locked if a front door is open and the key is in the engine switch.
Page 37
1-2. Opening, closing and locking the doors CAUTION To prevent an accident Observe the following precautions while driving the vehicle. Failing to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. Always use a seat belt.
1-2. Opening, closing and locking the doors Access doors (Access Cab models only) The access door (rear door) can be opened using the inside handle. Open the front door widely Pull (from the outside) or push (from the inside) the inside handle of the access door.
1-2. Opening, closing and locking the doors Tailgate The tailgate can be opened. Pull the handle Open the tailgate slowly The support cables will hold the tailgate horizontal. After closing the tailgate, try pulling it toward you to make sure it is securely locked. Removing the tailgate Before removing the tailgate These connector covers are used when removing the tailgate, to...
Page 40
1-2. Opening, closing and locking the doors To disconnect the wire harness connectors ( ), press and hold the lock of the tailgate wire harness connector (White) and pull apart. Tailgate wire harness connec- tor (White) Frame wire harness connector (Gray) Attach connector...
Page 41
1-2. Opening, closing and locking the doors Pull out the wire harness from the vehicle bed. Attach connector cover (Gray) to the tailgate wire har- ness connector (White). Tailgate wire harness connec- tor (White) Connector cover (Gray) Removing the tailgate Open the tailgate to the angle where you can release the brackets on the support cables...
Page 42
1-2. Opening, closing and locking the doors Slide the tailgate a little to the right to unhook the left side. To attach the tailgate, follow the removal procedure in reverse order. Rear step bumper For rear end protection and eas- ier step-up loading.
Page 43
1-2. Opening, closing and locking the doors NOTICE To prevent damage to the tailgate wire harness Do not pull out all of the tailgate wire harness before open the tailgate. To prevent damage to the camera lens (vehicles with rear view monitor system) Store the removed tailgate with the back-up camera lens facing upward.
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Bench type seat Seat position adjustment lever Separated type seats Seat position adjustment lever Driver’s seat lumbar sup- port adjustment knob (if equipped) Seatback angle adjustment lever...
Page 45
1-3. Adjustable components (seats, mirrors, steering wheel) Moving passenger’s seat for rear seat entry (if equipped) Lift the seatback angle adjusting lever or press the pedal behind the seatback. The seat will slide forward. Move the seat to the front-most position.
Page 46
1-3. Adjustable components (seats, mirrors, steering wheel) Folding passenger’s seat (vehicles with seatback table) Pull the seatback angle adjusting lever and raise the seatback to its upright position. Pull the seatback folding lever and fold the seatback down.
Page 47
1-3. Adjustable components (seats, mirrors, steering wheel) Active head restraints (Access Cab and Double Cab models only) When occupant’s back presses against the seatback during a rear-end collision, the head restraint moves slightly for- ward to help reduce the risk of whiplash on the seat occupant.
Page 48
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Seat adjustment Be careful that the seat does not hit passengers or luggage. Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of...
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats (Access Cab and Double Cab models) Access Cab models The bottom cushion of the rear seats can be raised and lowered. Before raising the bottom cushion Stow the seat belt buckles. This prevents the seat belt buckles from falling out when you fold the seatback.
Page 50
1-3. Adjustable components (seats, mirrors, steering wheel) Double Cab models The seatback of the rear seat can be folded. Before folding rear seats Stow the rear seat belt buck- les. This prevents the seat belt buckles from falling out when you fold the seatback.
Page 51
1-3. Adjustable components (seats, mirrors, steering wheel) Attach the head restraints to the holders located on the back sides of the bottom cush- ions. Fold down the seatback by pulling the lock release strap. CAUTION When the seatback is folded/the bottom cushion is raised Do not sit on or place anything on the seatback or auxiliary box while driving.
Page 52
1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE Before folding the seats The seat belts buckles must be stowed.
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Adjusting the head restraints Bench type front seat Vertical adjustment Push and hold the lock release button when lowering the head restraint. Removal Pull the head restraint up while pushing the lock release but- Lock release button ton.
Page 54
1-3. Adjustable components (seats, mirrors, steering wheel) When using the rear head restraints (Access Cab models only) To use Lift up the head restraint until it locks. To fold Pull the head restraint lock release lever to fold the head restraint.
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. Correct use of the seat belts l Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 56
1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the belt (front seats) Move the height adjuster up as needed until you hear a click. Down Push the lock release button and slide the height adjuster down. Center seat belt of the bench seat (Regular Cab models only) Make sure the shoulder belt pass through the guide when...
Page 57
1-3. Adjustable components (seats, mirrors, steering wheel) Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
Page 58
Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 59
If the pretensioner has activated, the seat belt becomes locked: it cannot be further extended, nor will it return to the stowed position. The seat belt cannot be used again and must be replaced at your Toyota dealer. Seat belt damage and wear Do not damage the seat belts by allowing the belt, plate, or buckle to be jammed in the door.
Page 60
1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE When using a seat belt extender When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself.
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold steering wheel and press the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. Pull the lever up.
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position...
Page 63
1-3. Adjustable components (seats, mirrors, steering wheel) Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and automatically reduces the reflected light. Turns automatic mode ON/ The indicator comes on when automatic mode is turned on.
Page 64
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted. Power-adjustable type Select a mirror to adjust. (L: left or R: right) Adjust the mirror up, down, in or out using the switch.
Page 66
1-3. Adjustable components (seats, mirrors, steering wheel) Manually adjustable type Adjust the mirror up, down, in or out by pushing the mirror surface. Folding back the mirrors Push backward to fold the mir- rors. Mirror operating conditions (vehicles with power-adjustable type only) The engine switch is in the ACC or ON position.
Page 67
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION When driving the vehicle Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. Do not adjust the mirrors while driving.
1-4. Opening and closing the windows Power windows (if equipped) The power windows can be opened/closed using the following switches. Driver’s power window switches Closing Opening One-touch opening (driver’s window only) Pressing the switch in the opposite direction will stop win- dow travel partway.
Page 69
1-4. Opening and closing the windows The power windows can be operated when The engine switch is in the ON position. Operating the power windows after turning the engine switch off The power windows can be operated for approximately 43 seconds even after the engine switch is turned off.
1-4. Opening and closing the windows Back window (vehicles with sliding type) The back window can be opened and closed using the lock release lever. OPEN/CLOSE Push the lock release lever and slide the back window. Closing the back window Make sure that the back window is securely closed after closing it.
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. Before refueling the vehicle Turn the engine switch off and ensure that all the doors and win- dows are closed. Opening the fuel tank cap Open the fuel filler door.
Page 72
1-5. Refueling Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly to the opposite direction. Fuel types Use unleaded gasoline. (87 Octane Rating [Research Octane Number 91] or higher) Fuel tank capacity Approximately 21.1 gal.
Page 73
This may cause static electricity to build up, resulting in a possible engine hazard. When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 74
1-5. Refueling NOTICE Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle’s painted surface. To prevent damage to the fuel filler door Do not apply excessive force.
1-6. Theft deterrent system Engine immobilizer system (if equipped) The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. The indicator light flashes after the key has been removed from the engine switch to indi-...
Page 76
1-6. Theft deterrent system For vehicles sold in Canada This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
1-6. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.
1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 45) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 79
1-7. Safety information CAUTION While driving Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and right front...
Page 81
1-7. Safety information Airbag system components Regular Cab models Access Cab and Double Cab models...
Page 82
1-7. Safety information Front passenger airbag Driver’s seat belt buckle switch Curtain shield airbags Front passenger’s seat belt Side airbags buckle switch AIR BAG ON and AIR BAG Occupant detection system OFF indicator lights (ECU and sensors) warning light Airbag sensor assembly RSCA OFF indicator light Driver airbag Front airbag sensors...
Page 83
1-7. Safety information SRS warning light This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensor assemblies, curtain shield air- bag sensor assemblies (Access Cab and Double cab models), driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system, AIR BAG ON and AIR BAG OFF indicator lights, front passenger’s seat position sensor (Regular Cab models), front passenger’s seat belt buckle switch, passenger airbag off switch (Access Cab models),...
Page 84
1-7. Safety information The SRS front passenger airbag will not activate if there is no passenger sitting in the right front passenger seat. However, the front passenger air- bag may deploy if luggage is put in the seat, or the seat belt is fastened, even if the seat is unoccupied.
Page 85
1-7. Safety information Types of collisions that may not deploy the SRS airbag (front airbags) The SRS front airbags are generally not designed to inflate if the vehicle is involved in a side or rear collision, if it rolls over, or if it is involved in a low- speed frontal collision.
Page 86
Pitching end over end When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Do not disconnect the battery cables before contacting your Toyota dealer. Any of the SRS airbags have been inflated.
Page 87
1-7. Safety information The surface of the seats with the side airbag is scratched, cracked or other- wise damaged. The portion of the front pillars, rear pil- lars or roof side rail garnishes (padding) containing the curtain shield airbags inside is scratched, cracked or other- wise damaged.
Page 88
An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 89
1-7. Safety information CAUTION SRS airbag precautions Do not sit on the edge of the seat or lean against the dashboard. Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. Do not drive the vehicle while the driver or passenger has items resting on their knees.
Wash off any residue as soon as possible to prevent skin irritation. If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer.
Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 92
1-7. Safety information Passenger airbag off switch (Access Cab models) The passenger airbag off switch is designed to disable the front pas- senger airbag in order to allow usage, if necessary, of the front pas- senger seat by a member of a passenger risk group identified in TABLE 1 is occupying the front passenger seating position (→P.
Page 93
1-7. Safety information Passenger risk group TABLE 1: A PASSENGER RISK GROUP Infant. An infant (less than 1 year old) who must ride in the front seat because: • Vehicle has no rear seat; • Vehicle has a rear seat too small to accommodate a rear-facing infant seat;...
Page 94
1-7. Safety information CAUTION When the passenger airbag off switch is turned off Do not turn the passenger airbag off switch to the OFF position except when a member of a passenger risk group identified in TABLE 1 is occupy- ing the front passenger seating position.
Page 95
1-7. Safety information CAUTION For normal driving Make sure the RSCA OFF indicator is not turned on. If it is left on, the curtain shield airbag will not activate in the event of an accident, which may result in death or serious injury.
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the right front passenger seat and activates or deactivates the devices for the front passenger.
Page 97
1-7. Safety information Conditions and operation of the front passenger occupant classification system Regular Cab and Double Cab models l Indicator/warning light Condition detected AIR BAG ON Front passen- by the front passen- and AIR BAG SRS warning ger’s seat belt ger occupant clas- OFF indicator light...
Page 98
1-7. Safety information : The right front passenger on the bench seat. (Regular Cab mod- els) : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec- ognize him/her as a child depending on his/her physique and pos- ture.
Page 99
1-7. Safety information Access Cab models l Indicator/warning light AIR BAG Front pas- Condition detected Passen- ON and senger’s by the front passen- ger airbag AIR BAG warning seat belt ger occupant clas- off switch reminder OFF indi- light sification system position light cator lights...
Page 100
1-7. Safety information l Devices Condition Curtain detected by Passen- Side air- Front shield air- Front pas- the front pas- ger air- bag on passen- bag in the senger’s senger occu- bag off the front front pas- seat belt ger air- pant switch passen-...
Page 101
1-7. Safety information : In case the indicator is not illuminated, consult this manual for installing the child restraint system properly. (→P. 104) CAUTION Front passenger occupant classification system precautions Observe the following precautions regarding front passenger occupant clas- sification system. Failure to do so may cause death or serious injury.
Page 102
Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. Child restraint systems installed on the rear seat should not contact the front seatbacks.
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 104
In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. Regular Cab models: Toyota strongly urges use of a proper child restraint system which conforms to the size of the child.
Page 105
CAUTION Child restraint precautions Access Cab and Double Cab models: Toyota strongly urges the use of a proper child restraint system that conforms to the size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 106
1-7. Safety information CAUTION Child restraint precautions A forward-facing child restraint system should be allowed to be installed on the front passenger seat only when it is unavoidable. Always move the seat as far back as possible even if AIR BAG OFF indicator light is illumi- nated, because the front passenger airbag could inflate with considerable speed and force.
Page 107
1-7. Safety information CAUTION When the child restraint system is not in use Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the restraint unsecured in the passenger compart- ment.
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using a seat belt or a child restraint lower anchor belt. Attach the top strap when installing a child restraint. Seat belts equipped with a child restraint locking mecha- nism (ALR/ELR belts except...
Page 109
1-7. Safety information Anchor bracket (for top strap) Regular Cab models Anchor brackets are pro- vided passenger seats. Access Cab models Anchor brackets are pro- vided for the front passen- seat left rear passenger seat. Double Cab models Anchor brackets are pro- vided for all rear passenger seats.
Page 110
1-7. Safety information CAUTION Rear-facing child restraint system If you must install a rear-facing child restraint system on the front passenger seat, make sure that the passenger airbag off switch is in the OFF position with the key removed and that the indicator light is on. Forward-facing child restraint system A forward-facing child restraint system which belongs to a passenger risk group should never be installed on the front passenger seat with the passen-...
Page 111
1-7. Safety information Run the seat belt through the child seat and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt and then allow it to retract slightly in order to activate the ALR lock mode.
Page 112
1-7. Safety information Run the seat belt through the child seat and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt and then allow it to retract slightly in order to activate the ALR lock mode.
Page 113
1-7. Safety information Sit the child in the booster seat. Fit the seat belt to the booster seat according to the manufac- turer’s instructions and insert the plate into the buckle. Make sure that the belt is not twisted. Check that the shoulder belt is correctly positioned over...
Page 114
1-7. Safety information Vehicles without seatback table (Type A) Widen the gap between the seat cushion and seatback slightly. Latch the hooks of the lower straps onto the anchorages and tighten the lower straps. If the child restraint has a top strap, the top strap should be latched onto the anchorages.
Page 115
1-7. Safety information Vehicles with seatback table (Type A) Widen the slits of the seat cushion slightly. Latch the hooks of the lower straps onto the anchorages and tighten the lower straps. If the child restraint has a top strap, the top strap should be latched onto the anchorages.
Page 116
1-7. Safety information Installing on the rear seat Type A Latch the hooks of the lower straps onto the anchorages and tighten the lower straps. If the child restraint has a top strap, the top strap should be latched onto the anchorages. For owners in Canada: The symbol on a child restraint system indicates the presence of...
Page 117
1-7. Safety information Installation with child restraint lower anchors (Double Cab models) Type A Widen the gap between the seat cushion and seatback slightly. Latch the hooks of the lower straps onto the anchorages and tighten the lower straps. If the child restraint has a top strap, the top strap should be latched onto the anchorages.
Page 118
1-7. Safety information Type B Widen the gap between the seat cushion and seatback slightly. Latch the buckles onto the anchorages. If the child restraint has a top strap, the top strap should be latched onto the anchorages. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
Page 119
1-7. Safety information Swing the seatback forward slightly (→P. 46) and remove the anchor bracket covers. Installing position: Right side passenger seat Center passenger seat Store the removed cover in a safe place such as the glove box. Right side passenger seat Route the top strap through the routing device as shown in the illustration.
Page 120
1-7. Safety information Center passenger seat Route the top strap through the routing device as shown in the illustration. Make sure the top strap is not twisted. Latch the hook onto the anchor bracket. Return the seatback to its orig- inal position.
Page 121
1-7. Safety information Child restraint systems with a top strap (Access Cab models) Installing on the front seat Remove the head restraint. Remove the anchor bracket cover. Store the removed cover in a safe place such as the glove box. Secure the child restraint using a seat belt or lower anchors.
Page 122
1-7. Safety information Installing on the rear seat Remove the anchor bracket cov- ers. Store the removed covers in a safe place such as the glove box. Secure the child restraint using a seat belt or lower anchors. Route the top strap through the routing device as shown in the illustration.
Page 123
1-7. Safety information Outside passenger seat Swing the seatback forward slightly. (→P. 51) Latch the hook onto the anchor bracket. Return the seatback to its orig- inal position. Make sure seatback securely locked by pushing for- ward and rearward on the top of the seatback.
Page 124
1-7. Safety information Laws and regulations pertaining to anchorages Anchorages conform to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819. CAUTION When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode.
Page 125
1-7. Safety information CAUTION When installing a child restraint system Only put a forward-facing or booster child seat on the front seat when it is unavoidable. When installing a forward -facing or booster child seat on the front passenger seat, move the seat as far back as possible even if AIR BAG OFF indicator light is illuminated.
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. Starting the engine →P. 138 Driving Automatic transmission With the brake pedal depressed, shift the shift lever to D. (→P. 141) Release the parking brake. (→P.
Page 127
2-1. Driving procedures Parking the vehicle Automatic transmission With the shift lever in D, depress the brake pedal. Set the parking brake. (→P. 148) Shift the shift lever to P. (→P. 141) When parking on a hill, if necessary, block the wheels. Turn the engine switch off to stop the engine.
Breaking in your new Toyota To extend the life of the vehicle, the following precautions are recommended...
Page 129
Large amounts of exhaust in the vehicle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. Do not under any circumstances shift the shift lever to P, R or N (automatic transmission) or R (manual transmission) while the vehicle is moving.
2-1. Driving procedures CAUTION When driving the vehicle Do not shift the shift lever to N while the vehicle is moving. Doing so may cause the engine brake to not operate properly and lead to an accident. Do not turn the engine off while driving. The power steering and brake booster systems will not operate properly if the engine is not running.
Page 131
2-1. Driving procedures CAUTION When driving on slippery road surfaces After driving through a puddle, lightly depress the brake pedal to make sure that the brakes are functioning properly. Wet brake pads may prevent the brakes from functioning properly. If the brakes on only one side are wet and not functioning properly, steering control may be affected, resulting in an accident.
Page 132
Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard. Toyota does not recommend occupying the rear cargo area when it is fitted with a slide-in camper, camper shell or other type cover while the engine is running.
Page 133
2-1. Driving procedures CAUTION When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
Page 134
If you hear a squealing or scraping noise while driving (brake pad wear limit indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. The rotor damage can result if the pads are not replaced when needed.
Page 135
Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. Brake function Changes in quantity and quality of oil and fluid used for the engine, trans- mission, transfer (4WD vehicles), differentials, etc.
2-1. Driving procedures Engine (ignition) switch Engine switch LOCK The steering wheel is locked and the key can be removed. Some electrical components such as the audio system can be used. All electrical components can be used. START For starting the engine. Starting the engine Automatic transmission Check that the parking brake is set.
Page 137
2-1. Driving procedures Turning the key from ACC to LOCK Shift the shift lever to P (auto- matic transmission) or N (man- ual transmission). (→P. 141, 144) Push in the key and turn to the LOCK position. Steering lock release When starting the engine, the engine switch may seem stuck in the LOCK posi- tion.
Page 138
2-1. Driving procedures CAUTION Caution while driving Do not turn the engine switch to the LOCK position. If in an emergency, you must turn the engine off while the vehicle is moving, turn the engine switch only to the ACC position. NOTICE To prevent battery discharge Do not leave the engine switch in the ACC or ON position for long periods if...
2-1. Driving procedures Automatic Transmission (if equipped) Select a shift position appropriate for the driving conditions. Shifting the shift lever 5-speed models While the engine switch is on, depress the brake pedal and move the shift lever. 4-speed models While the engine switch is on, depress the brake pedal and move the shift lever.
Page 140
2-1. Driving procedures Shift position uses Function Shift position 5-speed models 4-speed models Parking the vehicle or starting the engine Reversing Neutral Normal driving Position for engine brak- — Position for more powerful Position for engine brak- engine braking Position for more powerful engine braking Position for maximum engine braking : To improve fuel consumption and reduce noises, set the shift lever in D for normal driving.
Page 141
2-1. Driving procedures 4WD models mph (km/h) Downshifting Transfer position Maximum speed H2 and H4 82 (133) 4 → 3 31 (51) H2 and H4 54 (88) 3 → 2 21 (34) H2 and H4 24 (39) 2 → L 9 (15) When driving with the cruise control system (if equipped) The engine brake will not operate when downshifting from D to 4 (5-speed...
2-1. Driving procedures Manual Transmission (if equipped) Shifting the shift lever 6-speed models Fully depress the clutch pedal before operating the shift lever, and then release it slowly. 5-speed models Fully depress the clutch pedal before operating the shift lever, and then release it slowly.
Page 143
2-1. Driving procedures Maximum allowable speed Observe the following maximum allowable speeds in each gear when maxi- mum acceleration is necessary. 2WD models except PreRunner mph (km/h) Maximum speed Shift position 6-speed models 5-speed models 32 (52) 33 (53) 61 (99) 63 (101) 91 (146) 90 (146)
Page 144
2-1. Driving procedures 4WD models mph (km/h) Maximum speed Shift position Transfer position 6-speed models 5-speed models H2 and H4 30 (49) 30 (48) 11 (19) 11 (18) H2 and H4 58 (93) 57 (92) 22 (36) 22 (36) H2 and H4 85 (137) 82 (133) 33 (53)
2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
2-1. Driving procedures Parking brake Lever type l Sets the parking brake Fully set the parking brake while depressing the brake pedal. At this time, the indicator will come on. l Release the parking brake Press the button Turn the lever clockwise Press it in completely Pedal type Sets...
Page 147
2-1. Driving procedures Parking brake engaged warning buzzer The buzzer sounds to indicate that parking brake is still engaged (with the vehicle having reach a speed of 3 mph [5 km/h]). NOTICE Before driving Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear.
2-2. Gauges and meters Gauges and meters The following gauges, meters and displays illuminate when the engine switch is in the ON position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Engine coolant temperature gauge Displays the engine coolant temperature.
Page 149
2-2. Gauges and meters Odometer/trip meter Odometer: Displays the total distance the vehicle has been driven. Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display differ- ent distances independently.
Page 150
2-2. Gauges and meters NOTICE To prevent damage to the engine and its components Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. The engine may be overheating if the engine coolant temperature gauge is in the red zone (H).
2-2. Gauges and meters Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel...
Page 152
2-2. Gauges and meters Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Slip indicator (→P. 147) (→P. 174, 176, 185) Headlight high beam VSC OFF indicator indicator (→P. 157) (→P. 176,185) Downhill assist control Headlight indicator system indicator...
Page 153
There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
2-2. Gauges and meters Accessory meter (if equipped) Outside temperature Displays the outside air temperature. (→P. 308) Compass Displays the direction that the vehicle is heading. (→P. 332) Display button Every time you press this button, the display toggles through the following infor- mation.
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. The side marker, park- ing, tail, license plate and instrument panel lights turn on. The headlights and all lights listed above turn Canada U.S.A. Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams.
Page 156
2-3. Operating the lights and wipers Daytime running light system (if equipped) To make your vehicle more visible to other drivers, the front turn signal lights turn on automatically whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night. Automatic light off system Opening the driver’s door with the engine switch in the ACC or LOCK posi- tion will turn the headlights and tail lights off.
2-3. Operating the lights and wipers Fog light switch (if equipped) The fog lights improve visibility in difficult driving conditions, such as in rain or fog. On/off The fog lights can be turned on only when The headlights are on low beam.
2-3. Operating the lights and wipers Windshield wipers and washer Without intermittent type Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Washer operation...
Page 159
2-3. Operating the lights and wipers Intermittent wiper with interval adjuster Wiper intervals can be adjusted for intermittent operation (when INT is selected). Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Intermittent wiper interval adjustment (increase) Intermittent wiper interval adjustment (decrease)
Page 160
2-3. Operating the lights and wipers Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts. The windshield wiper and washer can be operated when The engine switch must be in the ON position. If no windshield washer fluid sprays Check that the washer nozzles are not blocked and if there is washer fluid in the windshield washer fluid reservoir.
2-4. Using other driving systems Cruise control (if equipped) Use cruise control to maintain a set speed without using the acceler- ator. Indicator Cruise control switch Set the vehicle speed Press the ON-OFF button to turn the cruise control on. At this time, the cruise control indicator will come on.
Page 162
2-4. Using other driving systems Adjusting the speed setting Increase speed Decrease speed Hold the lever until the desired speed setting is obtained. Fine adjustment of the set speed (approximately 1.0 mph [1.6 km/h]) can be made by lightly pushing the lever up or down and releasing it.
Page 163
If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer. CAUTION To avoid operating the cruise control by mistake Keep the ON-OFF button off when not in use.
2-4. Using other driving systems Rear view monitor system (vehicles with auto anti-glare inside rear view mirror) The rear view monitor system assists the driver by displaying an image of the area behind the vehicle. The image is displayed in reverse on the screen.
Page 165
2-4. Using other driving systems Switching the screen ON/OFF mode While displaying the screen, press the AUTO button on the inside the rear view mirror to switch the screen ON/OFF mode. Screen ON mode: Green indicator comes Screen OFF mode: Orange indicator comes on.
Page 166
2-4. Using other driving systems Rear view monitor system camera In the following cases, it may become dif- ficult to see the images on the screen, even when the system is functioning cor- rectly. The vehicle is in a dark area, such as at night.
Page 167
Conditions which may affect the rear view monitor system If the back of the vehicle has been hit, the camera’s position and mounting angle may have changed. Have the vehicle inspected by your Toyota dealer. Rapid temperature changes, such as when hot water is poured on the vehicle in cold weather, may cause the system to function abnormally.
2-4. Using other driving systems Four-wheel drive system (if equipped) Use the front-wheel drive control switch to select the following transfer modes. H2 (high speed position, two-wheel drive) Normal driving H4 (high speed position, four-wheel drive) Greater traction than two wheel drive.
Page 169
2-4. Using other driving systems Shifting between H4 and L4 Shifting from H4 to L4 Automatic transmission Stop the vehicle completely. Shift the shift lever to N. Push and turn the front-wheel drive control switch fully clock- wise. If the four-wheel drive indicator flashes and the buzzer sounds, try the above steps again.
Page 170
If the indicator light continues to blink even if doing so, contact your Toyota dealer as soon as possible. There may be a trouble in the four-wheel drive...
Page 171
2-4. Using other driving systems Shifting to L4. VSC is automatically turned off. Four-wheel drive usage frequency You should drive in four-wheel drive for at least 10 miles (16 km) each month. This will assure that the front-drive components are lubricated. CAUTION Caution while driving Never operate the front-wheel drive control switch if the wheels are slipping.
2-4. Using other driving systems Active traction control system (if equipped) The active traction control system automatically helps prevent the spinning of 4 wheels when the vehicle is started or accelerated on slippery road surfaces. System operation Vehicles with an automatic transmission: Stop the vehicle, shift the shift lever to N and put the front- wheel drive control switch in the L4 position.
Page 173
2-4. Using other driving systems When the rear differential is locked (vehicles with the rear differential lock system) The active traction control system is activated only when the vehicle speed is less than 3 mph (6 km/h). Sounds and vibrations caused by the active traction control system A sound may be heard from the engine compartment when the engine is started or just after the vehicle begins to move.
2-4. Using other driving systems AUTO LSD system The AUTO LSD system aids traction by using the traction control system to control engine performance and braking when one of the rear wheels begins to spin. The system should be used only when one of the rear wheels spin- ning occurs in a ditch or rough surface.
Page 175
2-4. Using other driving systems Automatic VSC reactivation If the AUTO LSD system is turned on and the vehicle speed decreases, the VSC system will turn off and the VSC OFF indicator will turn on. or, if the vehicle speed increases the VSC system will turn on and the VSC OFF indi- cator will turn off.
2-4. Using other driving systems Rear differential lock system (if equipped) The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or rugged surface. The rear differential lock system is effective in case one of the rear wheels is spinning.
Page 177
2-4. Using other driving systems Manual transmission 4WD models: Before using the rear differential lock system. Stop the vehicle or reduce your speed to less than 2 mph (3 km/h). Depress the clutch pedal and put the front-wheel drive control switch in the L4 position to see if this is sufficient. If this has no effect, additionally use the rear differential lock system.
Page 178
2-4. Using other driving systems After unlocking the rear differential To check that the indicator goes off, turn the engine switch to the ON posi- tion, but do not start the engine. CAUTION To avoid an accident Do not use the rear differential lock system except when wheel spinning occurs in a ditch or on a slippery or ragged surface.
2-4. Using other driving systems Downhill Assist Control system (if equipped) The downhill assist control system helps to prevent excessive speed on steep downhill descents. System operation The system will operate when the vehicle is traveling under 15 mph (25 km/h) and the front-wheel drive control switch is in the L4 position.
Page 180
ON position. The downhill assist control system indicator does not come on when the DAC switch is pressed. In the above cases have your vehicle checked by your Toyota dealer. CAUTION Do not rely excessively on the downhill assist control system.
2-4. Using other driving systems Clutch start cancel switch (if equipped) The switch allows the vehicle to be driven out of difficult situations by cranking the engine with the clutch engaged. Never use the switch for normal engine starting. Be sure to follow the starting procedure.
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ABS (Anti-lock Brake System) Helps to prevent wheel lock when the brakes are applied suddenly, or if the brakes are applied while driving on a slippery road surface.
Page 183
2-4. Using other driving systems When the VSC/TRAC/hill-start assist control systems are operating If the vehicle is in danger of slip- ping, the rear wheels (2WD mod- els) four wheels (4WD models) spin, the vehicle starts to roll backwards when starting on an incline, this indicator flashes to indicate that the VSC/ TRAC/hill-start...
Page 184
2-4. Using other driving systems Turning off TRAC and VSC Push and hold the button for more than 3 seconds while the vehicle is stopped to turn off both TRAC and VSC. The VSC OFF indicator light should come on. Push the button again to turn both systems back on.
Page 185
2-4. Using other driving systems Hill-start assist control is operational when (if equipped) The shift lever is in the D, 4, 3, 2 (5-speed automatic transmission), D, 3, 2 (4-speed automatic transmission) or L positions. The brake pedal is not depressed. Hill-start assist control will not operate when (if equipped) The shift lever is in the P, R or N positions.
In addition, make sure that the tires are inflated to the appro- priate tire pressure level. The ABS and VSC will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels.
2-4. Using other driving systems CAUTION Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction.
2-5. Driving information Off-road precautions (4WD models and PreRunner) This vehicle has higher ground clearance and narrower tread in rela- tion to the height of its center of gravity to make it capable of per- forming in a wide variety of off-road applications. Off-road vehicle feature l Specific design characteristics give it a higher center of gravity than ordinary passenger cars.
Page 189
2-5. Driving information CAUTION Off-road vehicle precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Therefore, the driver and all passengers should fasten their seat belts whenever the vehicle is moving.
Page 190
2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre- cautions to ensure your driving enjoyment and to help prevent the closure of areas to off-road vehicles. l Drive your vehicle only in areas where off-road vehicles are permit- ted to travel.
Page 191
2-5. Driving information CAUTION Off-road driving precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places. Do not grip the steering wheel spokes when driving off-road.
Page 192
2-5. Driving information NOTICE To prevent the water damage Take all necessary safety measures to ensure that water damage to the engine or other components does not occur. Water entering the engine air intake will cause severe engine damage. Water entering the automatic transmission will cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ulti- mately damage.
For better fuel economy, do not carry unnecessary weight. Deck rails Headboard rail Side rails To use the deck rails, you must install genuine Toyota accessories or their equiva- lent for the deck rails. Follow manufacturer’s instructions and precautions...
Page 194
2-5. Driving information CAUTION When you secure cargo with the deck rails Spread out tie-down/support locations evenly along the length of the rails. Do not exceed a total tensile load of 440 lb. (200 kg) per deck rail. To prevent luggage or cargo from sliding forward during braking, make sure the deck rail accessories such as storage box are securely attached on the deck rails.
Page 195
2-5. Driving information (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Example on your vehicle Cargo capacity Total load capacity...
Page 196
2-5. Driving information CAUTION Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment. Receptacles containing gasoline Aerosol cans Storage precautions Do not stack anything in the luggage compartment higher than the seatbacks.
2-5. Driving information Total load capacity and seating capacity These details are also described on the tire and loading information label.(→P. 381) CAUTION Overloading the vehicle Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident.
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. Pre-winter preparations l Use fluids that are appropriate to the prevailing outside tem- peratures.
2-5. Driving information When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. When parking the vehicle If the parking brake is set, it may freeze up, preventing it from being released. Stop the vehicle and move the shift lever to P if an automatic transmission, or move it to 1 when the vehicle is facing uphill or R when facing downhill if a manual transmission then place the...
2-5. Driving information Snow chain installation Observe the following precautions when installing and removing chains. Install and remove tire chains in a safe location. Install tire chains on the rear tires only. Do not install tire chains on the front tires. Install tire chains following the instructions provided in the accompanying instructions.
NOTICE Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
2-5. Driving information Trailer towing Your vehicle is designed primarily as a passenger-and-load carrying vehicle, and thus towing a trailer will have an adverse effect on han- dling, performance, braking, durability, and fuel consumption. For your safety and the safety of others, do not overload the vehicle or trailer.
Page 204
2-5. Driving information Gross axle weight The load on either the front or rear axle resulting from distribu- tion of the gross vehicle weight on both axles must not exceed the Gross Axle Weight Rating (GAWR) listed on the Certification Label.
Page 205
2-5. Driving information Trailer tongue load The trailer cargo load should be distributed so that the tongue load is 9 to 11% of the total trailer weight, not exceeding the maximum load of the following. Without towing package 350 lb. (158 kg) With towing package 650 lb.
Page 206
2-5. Driving information Towing a trailer Consult your Toyota dealer for further information about additional requirements such as a towing kits, etc. Hitch and tow hitch receiver Hitch Trailer hitch assemblies have different weight capacities estab- lished by the hitch manufacturer. Even though the vehicle may be rated for towing a higher weight, the operator must never exceed the maximum weight rating specified for the trailer hitch.
Page 207
2-5. Driving information Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers stamped with the required trailer ball size.
Page 208
2-5. Driving information Bumper towing The rear bumper of your vehicle is equipped with a hole to install a trailer ball. maximum gross trailer weight: 3500 lb. (1587 kg) The gross trailer weight (trailer weight plus the weight of cargo) when towing with the bumper must never exceed 3500 lb.
Break-in schedule Toyota recommends that you do not use a new vehicle or a vehicle with any new power train components (engine, transmission, differential, wheel bearings, etc.) to tow a trailer for the first 500 miles (800 km) of...
Page 210
2-5. Driving information Maintenance If you tow a trailer, your vehicle will require more frequent maintenance due to the additional load. (See “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.) Retighten the fixing bolts of the towing ball and bracket after approxi- mately 600 miles (1000 km).
Page 211
The tow hitch receiver installed on your vehicle must never be used on another vehicle. Hitches If you wish to install a trailer hitch, your Toyota dealer should be consulted. Use only a hitch that conforms to the total trailer weight requirement. Follow the directions supplied by the hitch manufacturer.
Page 212
2-5. Driving information NOTICE When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. Brakes Toyota recommends trailers with brakes that conform to any applicable fed- eral and state/provincial regulations.
Page 213
2-5. Driving information Trailer towing tips Your vehicle will handle differently when towing a trailer. The three main causes of vehicle-trailer accidents are driver error, excessive speed and improper trailer loading. Keep these in mind when towing. l Before starting out, check the trailer’s light and the vehicle-trailer connections.
Page 214
2-5. Driving information l Note that when making a turn, the trailer wheels will be closer than the vehicle wheels to the inside of the turn. Compensate by making a larger than normal turning radius. l Crosswinds and rough roads will adversely affect handling of your vehicle and trailer, causing sway.
Page 215
2-5. Driving information Have someone place wheel blocks under both the vehicle and trailer wheels. When the wheel blocks are in place, release the brakes slowly until the blocks absorb the load. Apply the parking brake firmly. Shift into 1 or R (manual transmission) or P (automatic trans- mission) and turn off the engine.
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground.
3-1. Using the air conditioning system and defogger Air conditioning system Type A Temperature control dial Fan speed control dial Air outlet selection dial Outside air or recirculated air mode switch Type B Temperature control dial Fan speed control dial Air outlet selection dial Outside air or recirculated Air conditioning...
Page 218
3-1. Using the air conditioning system and defogger Adjusting the settings Adjusting the temperature setting (Type A) Turn the temperature control dial clockwise to increase the temper- ature. Adjusting the temperature setting (Type B) Turn the temperature control dial clockwise (warm) or counter- clockwise (cool).
Page 219
3-1. Using the air conditioning system and defogger When the dial is set to , air flows to the upper body and feet. : Double Cab models only When the dial is set to , air flows to the feet. : Double Cab models only When the dial is set to , air...
Page 220
3-1. Using the air conditioning system and defogger When the dial is set to , air flows to the windshield and side windows. The air intake selector is automat- ically set to outside air mode. In this position, the air intake selector cannot be changed to the recirculated air mode.
Page 221
3-1. Using the air conditioning system and defogger Adjusting the position of the air outlets Center outlets Direct air flow to the left or right, up or down.
Page 222
3-1. Using the air conditioning system and defogger Right and left side outlets Direct air flow to the left or right, up or down. Opening and closing the air outlets Center outlets Open the vent. Close the vent.
Page 223
3-1. Using the air conditioning system and defogger Right and left side outlets Open the vent. Close the vent. For quick clearing of the windshield and side windows (type B only) Press to turn the air conditioning on. Using the system in recirculated air mode The windows will fog up more easily if the recirculated air mode is used for an extended period.
Page 224
3-1. Using the air conditioning system and defogger CAUTION To prevent the windshield from fogging up Do not set the air outlet selection dial to during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
3-2. Using the audio system Audio system types Type A: CD player with CD changer controller and AM/FM radio Type B: CD player with changer and AM/FM radio Type A Type B...
Page 226
3-2. Using the audio system Title Page Using the radio P. 231 Using the CD player P. 237 Playing back MP3 and WMA discs P. 244 Optimal use of the audio system P. 253 Operating the sub woofer P. 256 Using the AUX adapter P.
Page 227
3-2. Using the audio system CAUTION For vehicles sold in U.S.A. and Canada Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. Laser products •...
3-2. Using the audio system Using the radio Power Volume Adjusting the Station selector frequency Scanning for receivable stations AM/FM mode buttons Seeking the frequency ® Setting station presets (excluding XM Satellite Radio) ∧ Search for desired stations by turning or pressing “...
Page 229
3-2. Using the audio system Scanning all radio stations within range Press All stations with reception will be played for 5 seconds each. When the desired station is reached, press the button once again to stop scanning. ® Satellite Radio (if equipped) ®...
Page 230
The radio antenna is mounted on the right-side front fender. The antenna can be removed from the base by turning it. ® Satellite Radio The Toyota genuine satellite radio tuner and antenna allows you to ® receive and play XM Satellite Radio broadcasts.
Page 231
XM antenna cable is attached securely. ANTENNA There is a short-circuit in the antenna or the sur- rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to the XM Satellite Radio. The radio is being updated with the latest ®...
Page 232
3-2. Using the audio system ® The XM signal is too weak at the current location. NO SIGNAL Wait until your vehicle reaches a location with a stronger signal. The unit is acquiring audio or program information. LOADING Wait until the unit has received the information. The channel you selected is not broadcasting any OFF AIR programming.
Page 233
3-2. Using the audio system Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected. Consulting the dealer or an experienced radio/TV technician for help. NOTICE To prevent damage, remove the antenna in the following cases. The antenna will touch the ceiling of a garage.
3-2. Using the audio system Using the CD player CD selection Power Volume (type A with Fast-forward changer and type B) CD load CD eject Reverse (type B only) Random Display text playback message Search playback Repeat play Track selection Playback Loading CDs Loading a CD (type A)
Page 235
3-2. Using the audio system Insert a CD when the indicator on the slot turns from amber to green. The display changes from “WAIT” to “LOAD”. The indicator on the slot turns to amber when the CD is inserted. Insert the next CD when the indicator on the slot turns from amber to green again.
Page 236
3-2. Using the audio system Fast-forwarding and reversing tracks To fast-forward or reverse. Press and hold Selecting a CD (type A with a CD changer and type B) Selecting the desired CD Press Selecting loaded CDs Press and hold until you hear a beep. The first 10 seconds of the first track on each CD will be played.
Page 237
Canceling repeat play Press again. Error messages Refer to the following table and take the appropriate measures. If the prob- lem is not rectified, take the vehicle to your Toyota dealer. Correction Message Cause Procedures • The disc may be dirty •...
Page 238
3-2. Using the audio system Correction Message Cause Procedures Operation is stopped Eject the disc and WAIT due to a high temper- allow the player to ature inside the player cool down The external CD CD OPEN Close the lid changer lid is open There is no disc in the NO DISC...
Page 239
3-2. Using the audio system NOTICE CDs and adapters that cannot be used Do not use the following types of CDs or 3 in. (8 cm) CD adapters or Dual Disc. Doing so may damage the CD player and/or the CD insert/eject function. CDs that have a diameter that is not 4.7 in.
Page 240
3-2. Using the audio system NOTICE CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. Do not insert anything other than CDs into the CD slot. Do not apply oil to the CD player. Store CDs away from direct sunlight.
3-2. Using the audio system Playing back MP3 and WMA discs Power Volume Disc selection Fast-forward (type B only) Disc load (type B only) Disc eject Reverse Random File selection playback Search playback Repeat play Playback File selection Display text message Folder selection Loading MP3 and WMA discs Loading a disc (type A)
Page 242
3-2. Using the audio system Loading multiple discs (type B only) Press and hold until you hear a beep. “WAIT” is shown on the display. Insert a disc when the indicator on the slot turns from amber to green. The display changes from “WAIT” to “LOAD”. The indicator on the slot turns to amber when the disc is inserted.
Page 243
3-2. Using the audio system Selecting a folder Selecting folders one at a time To select the desired folder, press “∧” or “∨” on Selecting the desired folder by cueing the first file of each folder Press and hold until you hear a beep. The first 10 seconds of the first file in the each folder will be played.
Page 244
3-2. Using the audio system Repeat play Repeating a file Press Repeating all of the files in the folder Press and hold until you hear a beep. Random playback Playing files from a particular folder in random order Press Playing all of the files on a disc in random order Press and hold until you hear a beep.
Page 245
Canceling repeat play Press again. Error messages Refer to the following table and take the appropriate measures. If the prob- lem is not rectified, take the vehicle to your Toyota dealer. Correction Message Cause Procedures • The disc may be dirty •...
Page 246
3-2. Using the audio system Discs that can be used Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration. MP3 and WMA player protection feature To protect the internal components, playback is automatically stopped when a problem is detected while the MP3 and WMA player is being used.
Page 247
3-2. Using the audio system WMA file compatibility • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver.
Page 248
3-2. Using the audio system ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title and artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 249
3-2. Using the audio system NOTICE CDs and adapters that cannot be used (→P. 242) CD player precautions (→P. 243)
3-2. Using the audio system Optimal use of the audio system Displays the current mode Changes the following set- ting • Sound quality and volume balance (→P. 254) The sound quality and bal- ance setting can be changed to produce the best sound. •...
Page 251
3-2. Using the audio system Adjusting sound quality Turning adjusts the level. Sound qual- Mode Turn to the Turn to the Level ity mode displayed left right Bass -5 to 5 Midrange -5 to 5 High Treble -5 to 5 Shifts to roof /roof...
Page 252
3-2. Using the audio system JBL brand audio system When “ASL” is selected, turning to the right turns “ASL” on , and turning to the left turns “ASL” off. ASL automatically adjusts the volume and tone quality according to vehi- cle speed.
3-2. Using the audio system Operating the sub woofer (on some Access Cab models) LIGHT ON The sub woofer illumination turns on. In this position, the sub woofer operates.
3-2. Using the audio system Using the AUX adapter This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Connect the portable audio device. Press...
Page 255
3-2. Using the audio system Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio device itself. When using a portable audio device connected to the power outlet or cigarette lighter Noise may occur during playback.
3-2. Using the audio system Using the steering wheel audio switches (if equipped) Some audio features can be controlled using the switches on the steering wheel. Volume Radio: Select radio stations Select tracks, files (MP3 and WMA) and discs Power on/off, select audio source Turning on the power Press...
Page 257
: Except JBL brand audio system— ® ® Use of XM Satellite Radio requires XM turner and service. Contact your Toyota dealer. Adjusting the volume Press “+” on to increase the volume and “–” to decrease the volume. Press and hold “+” or “–” on to continue increasing or decreasing the volume.
Page 258
3-2. Using the audio system Selecting a folder (type A) Press to select the CD mode. Press and hold “∧” or “∨” on until you hear a beep. Selecting a disc in the CD player (type A with a CD changer and type B) Press to select the CD mode.
3-3. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) (if equipped) ® This system supports Bluetooth , which allows you connect a cellu- lar phone without using cables and to make or receive calls without operating the cellular phone buttons.
Page 260
3-3. Using the hands-free phone system (for cellular phone) Conditions under which the system will not operate ® If using a cellular phone that does not support Bluetooth If the cellular phone is switched off If you are outside service range If the cellular phone is not connected If the cellular phone’s battery is low ®...
Page 261
3-3. Using the hands-free phone system (for cellular phone) Certification for the hands-free phone system FCC ID: ACJ932C5ZZZ035 IC ID: 216J-C5ZZZ035 MADE IN U.S.A. NOTE: This device complies with Part 15 of the FCC Rules and RSS-210 of industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired oper- ation.
Page 262
3-3. Using the hands-free phone system (for cellular phone) FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system Audio unit ® Displays Bluetooth con- nection condition If “BT” is not displayed, the hands-free phone system cannot be used. Displays the reception level Displays such items as numbers, names, mes-...
Page 264
3-3. Using the hands-free phone system (for cellular phone) Steering wheel telephone switches Volume The voice guidance volume cannot be adjusted by using this switch. Hands-free phone system off/ends a call/refuses a call Hands-free phone system on/starts a call Press: Voice command sys- tem on Press and hold: Voice com- mand system off...
Page 265
3-3. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker, you can speak voice commands aloud to control the hands-free phone system without looking at the display or operating Operation procedure when using voice commands Press and say a voice command for a desired function.
Page 266
3-3. Using the hands-free phone system (for cellular phone) Register a phone name by either of the following methods. a. Select “(RECORD NAME)” by using , and say aloud the name you would like to register for the phone. b. Press and say aloud the name you would like to reg- ister for the phone.
Page 267
3-3. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu Dialing a phone number Callback stored in the incoming his- (CALLBACK) tory memory By voice (BY VOICE) By phone (BY PHONE) Add entry Adding a new phone num- (ADD Call history...
Page 268
3-3. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu Set PIN Setting a PIN (SET PIN) Phone book lock Security Locking the phone book (PHBK (SECU- LOCK) RITY) Phone book unlock Unlocking the phone book (PHBK UNLOCK) Pair phone...
Page 269
3-3. Using the hands-free phone system (for cellular phone) Using a short cut voice command First menu Second menu Operation detail Dialing a phone number reg- Dial “XXX (name)” istered in the phone book Phone book add Adding a new phone number entry Changing the name of a Phone book change...
Page 270
3-3. Using the hands-free phone system (for cellular phone) Automatic adjustment of volume When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. When using a voice command For numbers, speak a combination of single digits from zero to nine, # (pound), ∗...
3-3. Using the hands-free phone system (for cellular phone) Making a phone call Making a phone call l Dialing by inputting a phone number “Dial by number” l Dialing by inputting a name “Dial by name” l Speed dialing l Dialing a phone number stored in the outgoing history mem- “Redial”...
Page 272
3-3. Using the hands-free phone system (for cellular phone) Dial by one of the following methods: a. Press b. Press and say “Dial”. c. Select “Dial” by using Dialing by inputting a name Press and say “Dial by name”. Select a registered name to be input by either of the following methods: a.
Page 273
3-3. Using the hands-free phone system (for cellular phone) When receiving a phone call Answering the phone Press Refusing the call Press Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or conversing a call. Use one of the fol- lowing methods: a.
Page 274
3-3. Using the hands-free phone system (for cellular phone) Using a call history memory Follow the procedure below to use a phone number stored in call his- tory memory: Press and say “Redial” (when using a phone number stored in the outgoing history memory) or “Callback” (when using a phone number stored in the incoming history mem- ory).
Page 275
3-3. Using the hands-free phone system (for cellular phone) A shortcut to Redial is available Press the twice. Muting your voice Your voice can be muted so that the other party cannot hear your voice dur- ing a call. To set or cancel: Press and say “Mute”.
3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following function can be used for regis- tered cellular phones: Functions and operation procedures To enter a menu for each function, follow the steps below by using voice commands or l Registering a cellular phone...
Page 277
3-3. Using the hands-free phone system (for cellular phone) Selecting a cellular phone to be used Select “Select phone” by using a voice command or Pattern A Select a cellular phone to be used by either of the following methods, and select “Confirm” by using a voice command or a.
Page 278
3-3. Using the hands-free phone system (for cellular phone) b.Press and say “List phones”. While the desired phone name is being read aloud, press c. Select the desired phone name by using Press or select “(RECORD NAME)” by using and say a new name. Select “Confirm”...
Page 279
3-3. Using the hands-free phone system (for cellular phone) Changing the passkey Select “Set passkey” by using a voice command or Pattern A Press , say a four to eight-digit number, and select “Confirm” by using a voice command or Pattern B Select a four to eight-digit number by using The number should be input one digit at a time.
Page 280
3-3. Using the hands-free phone system (for cellular phone) b. Press and say “List phones”. While the name of the desired cellular phone is being read aloud, press Pattern B Select a cellular phone to be deleted by using The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.
3-3. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: Security setting items and operation procedure l Setting or changing the PIN (Personal Identification Number) 1. “Setup” → 2. “Security” → 3. “Set PIN” l Locking the phone book 1.
Page 282
3-3. Using the hands-free phone system (for cellular phone) Changing the PIN Select “Set PIN” by using a voice command or Enter the registered PIN by using a voice command or Enter a new PIN by using a voice command or When using , input the number one digit at a time.
Page 283
3-3. Using the hands-free phone system (for cellular phone) Setting voice guidance volume Select “(GUIDANCE VOL)” by using Change the voice guidance volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization Select “(INITIALIZE)” and then “(CONFIRM)” by using Select “(CONFIRM)”...
3-3. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: l Adding a new phone number 1. “Phone book” → 2. “Add entry” l Changing a registered name 1.
Page 285
3-3. Using the hands-free phone system (for cellular phone) Use one of the following methods to input a phone number: Inputting a phone number by using voice commands STEP2-1 Select “By voice” by using a voice command or STEP2-2 Press , say the desired phone number, and select “Confirm”...
Page 286
3-3. Using the hands-free phone system (for cellular phone) Selecting a phone number from outgoing or incoming history mem- STEP2-1 Select “Call history” by using a voice command or STEP2-2 Select “Outgoing” or “Incoming” by using a voice command or STEP2-3 Select the data to be registered by either of the fol- lowing methods: a.
Page 287
3-3. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or a. Press and say the desired name. b. Select “(RECORD NAME)” by using , and say the desired name.
Page 288
3-3. Using the hands-free phone system (for cellular phone) c. Select the desired data by using Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by using a voice command or b.
Page 289
3-3. Using the hands-free phone system (for cellular phone) Deleting registered data Select “Delete entry” by using a voice command or Pattern A Select data to be deleted by either of the following methods, and select “Confirm” by using a voice command or a.
Page 290
3-3. Using the hands-free phone system (for cellular phone) Listing the registered data Select “List names” by using a voice command and the system begins reading aloud the list of the registered data. When listing is complete, the system returns to “Phone book”. Pressing while an entry is being read aloud selects the entry, and the following functions will be available.
3-4. Using the interior lights Interior lights list Interior light (→P. 295) Personal lights (if equipped) (→P. 295) Illuminated entry system When the interior light switch is in the DOOR position, the interior light auto- matically turns on/off according to whether the doors are locked/unlocked and whether the doors are open/closed.
3-5. Using the storage features List of storage features Glove box Glove box Overhead console (if equipped) Bottle holders Console boxes (Access Cab and Double Cab models) Auxiliary boxes Cup holders Glove box Pull up the lever.
3-5. Using the storage features Glove box and console boxes CAUTION Caution while driving Keep the glove box closed. Injuries may result in the event of an accident or sudden braking. Console boxes (Access Cab and Double Cab models only) Front (Access Cab and Double Cab models) Push the button.
3-5. Using the storage features Console boxes and cup holders Removing the cargo net (front console box) Unhook the net. CAUTION Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking. Cup holders Type A (Bench type front seat)
Page 296
3-5. Using the storage features Cup holders Type B (Separated type front seats with an automatic transmis- sion) Type C (Separated type front seats with a manual transmission) Adjusting the cup holder to the size of the cups or drink-cans (type A and type B) Pattern A Adjust the holder.
3-5. Using the storage features Cup holders and bottle holders Pattern B Remove the holder. Change the holder position. STY34AF021 CAUTION Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 298
3-5. Using the storage features Bottle holders Front console box (Access Cab and Double Cab models) Rear (Double Cab models) Bottle holders Depending on their size or shape, some bottles may not fit in the holders. NOTICE Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle.
3-5. Using the storage features Auxiliary boxes Auxiliary boxes Front Pull the lid down. Under the rear seats (Access Cab models) Pull up the lever. Raise the bottom cushion up. Turn the knob counterclockwise.
Page 300
3-5. Using the storage features Auxiliary boxes Open the lid. Press the lid against the bot- tom of the lower cushion until it is supported by the hook- and-loop fastener. Make sure that the lid is sup- ported to prevent it from closing unexpectedly.
3-5. Using the storage features Overhead console Overhead console The overhead console is useful for temporarily storing sunglasses and similar small items. Pull the lid down while pushing the knob. CAUTION Items that should not be left in the overhead console Do not leave glasses or lighters in the console.
3-6. Other interior features Sun visors Type A Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender: Place in side position, then slide backwards. Type B Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.
3-6. Other interior features Clock Adjusts the hours Adjusts the minutes The clock is displayed when The engine switch is in the ACC or ON position. When disconnecting and reconnecting battery terminals The time display will automatically be set to 1:00.
(Fahrenheit) and °C (Celsius). When – –°F or – –°C is displayed The system may be malfunctioning. Take your vehicle to your Toyota dealer. The outside air temperature is displayed when The engine switch is in the ON position. When disconnecting and reconnecting battery terminals The display will automatically be set to the initial mode.
3-6. Other interior features Cigarette lighter Push the cigarette lighter. The cigarette lighter will pop up when it is ready for use. The cigarette lighter can be used when The engine switch is in the ACC or ON position. CAUTION To avoid burns or fires Do not touch the metal parts of the cigarette lighter.
3-6. Other interior features Power outlet (12V DC) The power outlet can be used for 12 V accessories that run on less than 10A. The power outlet can be used when The engine switch is in the ACC or ON position. NOTICE To avoid damaging the power outlet Close the power outlet lid when not in use.
3-6. Other interior features Power outlet (if 115V AC equipped) The power outlet can be used for electrical appliances. Main switch To use the power outlet, turn on the main switch. The power supply starts a few seconds after the main switch is pressed.
Page 309
3-6. Other interior features • The shift lever is in N and the clutch pedal is not depressed. (manual transmission) A maximum capacity of 400W can only be restored by turning the power outlet main switch off and then on again under condition described above.
Page 310
When the cabin temperature is high, open the windows to cool the tempera- ture down. Once it reaches the normal temperature, turn the power outlet main switch on again. If the power supply is not resumed even after performing the above proce- dure, have the vehicle inspected by a Toyota dealer.
Page 311
Do not modify, disassemble or repair the power outlet or its inverter, in any way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact a Toyota dealer for any necessary repairs. To prevent injuries and accidents, securely fix all electric appliances...
Page 312
3-6. Other interior features NOTICE To avoid damaging the power outlet and the plug Close the power outlet lid when not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit. Do not use plug adaptors to connect too many plugs to the power outlet. After inserting a plug, gently close the power outlet lid.
Page 313
If the power outlet is loose when an electrical appliance plug is con- nected Replace the outlet. Contact a Toyota dealer for any necessary replacements. If the power outlet gets dirty Turn the main switch off and use a soft, clean cloth to wipe it gently.
3-6. Other interior features Seatback table (if equipped) Front passenger’s seatback can be used as a temporary table only when the vehicle is stopped. Fold down the front passen- ger’s seat to use the seatback table. (→P. 47) CAUTION Caution while driving Observe the following precautions to avoid death or serious injury.
3-6. Other interior features Floor mat Securely place a mat that matches the size of the space on the car- pet. Secure the front floor mat using the hooks provided. CAUTION When inserting the floor mat Observe the following precautions. Failure to do so may result in the floor mat slipping and interfering with the movement of the pedals during driving, resulting in an accident.
3-6. Other interior features Luggage compartment features Behind the rear seat (Double Cab models only) Cargo net hooks (vehicles with sub woofer) Grocery bag hooks Flashlight holder Storage boxes Deck Auxiliary boxes Tie-down cleats Deck hooks...
Page 317
3-6. Other interior features Auxiliary boxes Left side Turn the knob counterclock- wise. Open the lid. Right side (vehicles without 115V power outlet) Turn the knob counterclock- wise. Open the lid. Right side (vehicles with 115V power outlet) Turn the knob counterclock- wise.
Page 318
3-6. Other interior features CAUTION Caution while driving Keep the auxiliary boxes closed and locked. Injuries may result in the event of an accident or sudden braking. Deck hooks Deck hooks are provided for securing loose items. CAUTION When not in use Keep the deck hooks folded.
Page 319
3-6. Other interior features Tie-down cleats The deck rail system enables you to insert and move tie-down cleats to their best location along deck rails to secure a load. Locking plate Thumb wheel Tie-down cleat Installing the tie-down cleat Loosen the thumb wheel in a counterclockwise motion, and depress the wheel so that the locking plate maintains 0.5 in.
Page 320
3-6. Other interior features Insert the locking plate into the deck rail, rotate the tie-down cleat 90°, and release the thumb wheel. Slide the cleat to the closest detent in the rail system. You will feel that the locking plate snaps into a detent.
Page 321
3-6. Other interior features CAUTION Tie-down cleat precautions Properly install and tighten the tie-down cleats into the deck rail system. Failure to properly install and tighten the tie-down cleats can cause cargo to become unsecured. Unsecured cargo can cause injury when the vehi- cle is in motion.
Page 322
3-6. Other interior features Left side Removing the separator Remove the separator. It can be installed in various positions as required. Flashlight holder (Double Cab models only) Flashlight holder is designed to hold the flashlight securely.
Page 323
3-6. Other interior features Removing the flashlight holder Remove the flashlight holder. It can be installed in various positions as required. Grocery bag hooks (Double Cab models only) Grocery bag hook is designed to hang things like grocery bag. NOTICE Grocery bag hook weight capacity Do not hang any object heavier than 7 lb.
Page 324
3-6. Other interior features Cargo net hooks (Double Cab models with sub woofer) Cargo net hooks are designed to hang the factory-supplied cargo net. NOTICE To prevent damage to the cargo net hook Do not hang items other than the cargo net.
3-6. Other interior features Garage door opener box (if equipped) The garage door opener box is designed to store a garage door opener transmitter. Storing the transmitter in the box Pull the lid down while pushing the knob. Remove the hook-and-loop fastener square.
Page 326
3-6. Other interior features Remove the paper strip covering the adhesive on back side of square. Adhere the square to back side of the transmitter near the center. Place the transmitter with fas- tener square facing inside of box into the box. Make sure the transmitter but- ton is located above button pins.
Page 327
3-6. Other interior features Operating the garage door opener transmitter When the garage door opener transmitter is properly installed, you can operate the transmitter by pushing the button of the cover. Push the button. If a garage door opener transmitter has wire clip for sun visor This clip must be removed prior to adhe- sion of the fastener.
Page 328
3-6. Other interior features CAUTION Caution while driving Keep the garage door opener box closed. Injuries may result in the event of an accident or sudden braking. To prevent an accident Keep the remaining spacers away from the children.
3-6. Other interior features Compass (vehicles with accessory meter) The compass on the accessory meter indicates the direction in which the vehicle is heading. Operation To turn the compass on or off, press the switch. Displays and directions Display Direction North Northeast East...
Page 330
3-6. Other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
Page 331
3-6. Other interior features Circling calibration Stop the vehicle where it is safe to drive in a circle. Press the switch until CAL appears on the display. At this time, the compass display is locked in N. Drive the vehicle at 5 mph (8 km/h) or less in a circle until the direction is displayed.
Page 332
3-6. Other interior features Conditions unfavorable to correct operation The compass may not show the correct direction in the following conditions: The vehicle is stopped immediately after turning. The compass does not adjust while the vehicle is stopped. The engine switch is turned off immediately after turning. The vehicle is on an inclined surface.
Page 333
3-6. Other interior features NOTICE To avoid the compass malfunctions Do not place magnets or any metal objects on or near the roof. Doing this may cause a malfunction of the compass sensor. To ensure normal operation of the compass Do not perform circling calibration of the compass in a place where the earth’s magnetic field is subject to interference by artificial magnetic fields.
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. l Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 335
4-1. Maintenance and care To prevent deterioration and body corrosion Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads • If you see coal tar or tree sap on the paint surface •...
Allow the solution to soak in for a few minutes. Remove the dirt and wipe off the solution with a clean, damp cloth. Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior.
Page 337
4-1. Maintenance and care Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not apply water. The excellent results are obtained when keeping the carpet as dry as possible.
Page 338
4-1. Maintenance and care NOTICE Cleaning detergents Do not use organic substances such as benzene or gasoline, acidic or alka- line solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. Preventing damage to leather surfaces Observe the following precautions to avoid damage to and deterioration of leather surfaces.
Warranty Information Booklet”, “Owner’s Manual Supplement”. Repair and replacement It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than Toyota dealer performs repairs, confirm the war-...
Page 340
4-2. Maintenance Allow inspection and repairs to be performed by a Toyota dealer Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
“Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items...
Page 342
4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be hold securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? •...
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test:...
• FMVSS No.116 DOT 3 or SAE Brake fluid level (→P. 364) J1703 brake fluid • Rag or paper towel • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 346
4-3. Do-it-yourself maintenance Items Parts and tools • Bulb with same number and watt- age rating as original Light bulbs (→P. 403) • Phillips-head screwdriver • Conventional wrench • Automatic transmission fluid Power steering fluid level ® DEXRON II or III (→P.
Page 347
4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. When working on the engine compartment Keep hands, clothing, and tools away from the moving fan and engine drive belt.
Page 348
4-3. Do-it-yourself maintenance NOTICE If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air. Also a backfire could cause a fire in the engine compart- ment. If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high.
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Pull up the hood catch lever and lift the hood.
Page 350
4-3. Do-it-yourself maintenance Hold the hood open by insert- ing the supporting rod into the slot. CAUTION Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury.
Page 352
4-3. Do-it-yourself maintenance 4.0 L V6 (1GR-FE) engine Washer fluid tank (→P. 371) Engine oil filler cap (→P. 357) Power steering fluid reservoir (→P. 366) Brake fluid reservoir (→P. 364) Radiator cap Fuse box (→P. 393) Engine oil level dipstick (→P.
Page 353
4-3. Do-it-yourself maintenance Engine oil Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil Park the vehicle on level ground. After turning off the engine, wait a few minutes for the oil to drain back into the bottom of the engine.
Page 354
4-3. Do-it-yourself maintenance 2.7 L 4-cylinder (2TR-FE) engine Full 4.0 L V6 (1GR-FE) engine Full Adding engine oil 2.7 L 4-cylinder (2TR-FE) engine If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine.
Page 355
4-3. Do-it-yourself maintenance 4.0 L V6 (1GR-FE) engine Make sure to check the oil type and prepare the items needed before adding oil. Oil grade ILSAC multigrade engine oil Items Clean funnel Remove the oil filler cap, turning it counterclockwise. Add engine oil slowly.
Page 356
4-3. Do-it-yourself maintenance Recommended viscosity 2.7 L 4-cylinder (2TR-FE) engine SAE 5W-20 or 0W-20 : SAE 5W-20 or 0W-20 engine oil may be used. However, SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. Outside temperature 4.0 L V6 (1GR-FE) engine SAE 5W-30 is the best choice for...
Page 357
1000 km) If you consume more than 1.1 qt. (1.0 L, 0.9 lmp.qt.) every 600 miles (1000 km), contact your Toyota dealer. After changing the engine oil (U.S.A. only) The oil change system should be reset. Perform the following procedures: Turn the engine switch off with the odometer reading shown.(→P.
Page 358
Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 359
If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer pressure test the cap and check for leaks in the cooling system. Coolant selection Only use “Toyota Super Long Life Coolant”...
Page 360
Check the radiator and condenser and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION When the engine is hot Do not touch the radiator or condenser as they may be hot and may cause burns.
Page 361
4-3. Do-it-yourself maintenance Type B Adding fluid Make sure to check the fluid type and prepare the necessary items. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Items Rag or paper towel Type B only Turn the engine switch off. Depress the brake pedal 20 times or more.
Page 362
4-3. Do-it-yourself maintenance CAUTION When filling the reservoir Take care because brake fluid can harm your hands or eyes and damage painted surfaces. If fluid gets on your hands or in your eyes, flush the affected area with clean water immediately. If you still experience discomfort, see a doctor.
Page 363
4-3. Do-it-yourself maintenance Hot: Vehicle has been driven around 50 mph (80 km/h) for 20 minutes, or slightly longer in frigid temperatures. (Fluid temperature, 104°F - 175°F [40°C - 80°C]) Cold: Engine has not been run for about 5 hours. (Room tem- perature, 32°F - 104°F [0°C - 40°C]) 4.0 L V6 (1GR-FE) engine Full (when cold)
Page 364
4-3. Do-it-yourself maintenance CAUTION Checking the fluid level Take care, as the reservoir may be hot. NOTICE When adding fluid Avoid overfilling, or the power steering may be damaged. After replacing the reservoir cap Check the steering box case, vane pump and hose connections for leaks or damage.
Page 365
Checking battery condition Check the battery condition using the indicator color. Type A Green: Good condition Dark: Charging is necessary. Have the vehicle inspected by your Toyota dealer. Clear or light yellow: Not work- ing properly, have the battery checked your Toyota dealer.
Page 366
4-3. Do-it-yourself maintenance CAUTION Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near bat- tery: Do not cause sparks by touching the battery terminals with tools.
Page 367
4-3. Do-it-yourself maintenance NOTICE When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. Washer fluid If any washer does not work, the washer tank may be empty. Open the lid. Add washer fluid.
Page 368
4-3. Do-it-yourself maintenance NOTICE Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. Diluting washer fluid Dilute washer fluid with water as necessary. Refer to the freezing temperatures listed on the washer fluid tank.
The tire pressure warning system Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 427)
Page 370
Have tire pressure warning valve and trans- mitter ID codes registered by your Toyota dealer. (→P. 375) Initializing the tire pressure warning system The tire pressure warning system must be initialized in the fol-...
Page 371
The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code of tire pressure warning valve and transmitter. Have the ID code registered by your Toyota dealer.
Page 372
A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 373
4-3. Do-it-yourself maintenance Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 374
If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. When operating the tire pressure warning reset switch, the tire pres- sure warning light does not flash 3 times.
Page 375
4-3. Do-it-yourself maintenance Tire pressure warning system certification For vehicles sold in U.S.A. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 376
Do not mix tires of different makes, models, tread patterns or tread- wear. Do not use tire sizes other than those recommended by Toyota. Do not mix radial, bias-belted, or bias-ply tires. Do not mix summer, all season and winter tires.
4-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 475) Regular Cab and Double Cab models...
Page 379
4-3. Do-it-yourself maintenance Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. Press the tip of the tire pressure gauge onto the tire valve. Read the pressure using the graduations of the gauge. If the tire inflation pressure is not within the recommended levels, adjust inflate the tire.
Page 380
Reduced driving comfort and tire life Reduced safety Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 381
4-3. Do-it-yourself maintenance CAUTION Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. Excessive wear Uneven wear Poor handling Possibility of blowouts resulting from overheated tires Poor sealing of the tire bead Wheel deformation and/or tire separation A greater possibility of tire damage from road hazards...
Used wheels l Bent wheels that have been straightened Wheel precautions l Use only Toyota wheel nuts and wrench designed for use with your aluminum wheels. l When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 100 miles (160 km).
Page 383
Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the engine switch off. Open the glove box. Slide off the damper. Push in each side of the glove box to disconnect the claws.
Page 385
4-3. Do-it-yourself maintenance Open the filter door. Remove the filter. Replacement method Remove the air conditioning filter and replace it with a new one. When installing the filter, follow the instructions indicated on the label.
Page 386
4-3. Do-it-yourself maintenance Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.) If air flow from the vents decreases dramatically The filter may be clogged.
4-3. Do-it-yourself maintenance Wireless remote control battery (if equipped) Replace the battery with a new one if it is discharged. You will need the following items: Lithium battery CR2032 Replacing the battery Remove the cover using a coin protected with tape etc. Remove the discharged trans- mitter battery.
Page 388
The wireless remote control will not function properly. The operational range is reduced. Use a CR2032 lithium battery Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. Replace only with the same or equivalent type recommended by your Toyota dealer.
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the engine switch off. The fuses are located in the following places. To check the fuses, follow the instructions below.
Page 390
4-3. Do-it-yourself maintenance After a system failure, see “Fuse layout and amperage rat- ings” (→P. 396) for details about which fuse to check. Remove the fuse with the pull- out tool. Check if the fuse has blown. Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating.
Page 391
4-3. Do-it-yourself maintenance Type B Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Replace it with one of an appropriate amperage rating.
Page 392
4-3. Do-it-yourself maintenance Fuse layout and amperage ratings Engine compartment Type A Type B...
Page 393
4-3. Do-it-yourself maintenance Fuse Ampere Circuit 10 A Air conditioning system FR FOG 15 A Front fog lights TOWING TAIL 30 A Trailer lights (tail lights) Stop lights, high mounted stop- light, vehicle stability control sys- tem, anti-lock brake system, shift STOP 10 A lock system, multiport fuel injection...
Page 394
4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ 20 A sequential multiport fuel injection system HORN 10 A Horn Multiport fuel injection system/ A/F HEATER 15 A sequential multiport fuel injection system Wireless remote control system, air conditioning system, multiplex ECU-B 7.5 A communication system, meter and...
Page 395
4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ A/PUMP 50 A sequential multiport fuel injection system Anti-lock brake system, vehicle sta- ABS NO.2 30 A bility control system AC SKT 100 A Cigarette lighter, power outlets 120 A* AM1, AC SKT, HEATER, FR FOG, STOP, OBD, J/B, TOWING TAIL, TOWING BRK and BATT CHG...
Page 396
4-3. Do-it-yourself maintenance Under the instrument panel Fuse Ampere Circuit Multiport fuel injection system/ sequential multiport fuel injection system, anti-lock brake system, 15 A traction control system, vehicle sta- bility control system, SRS airbag system, front passenger occupant classification system Meter and gauge, emergency GAUGE 7.5 A...
Page 397
(→P. 403) If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. If there is an overload in the circuits The fuses are designed to blow before the entire wiring harness is damaged.
Page 398
Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix.
You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 400
4-3. Do-it-yourself maintenance Rear bulb locations High mounted stoplight Rear turn signal lights Back-up lights License plate lights Replacing light bulbs Headlights Unplug the connector.
Page 401
4-3. Do-it-yourself maintenance Remove the rubber cover. Release bulb retaining spring. Remove the bulb. To install a new bulb, align the tabs of the bulb with the cutouts of the mounting hole.
Page 402
4-3. Do-it-yourself maintenance Front fog lights (if equipped) Unplug the connector while pull- ing the lock release. Turn the bulb counterclockwise.
Page 403
4-3. Do-it-yourself maintenance Parking and front side marker lights Turn the bulb base counterclock- wise. Remove the light bulb.
Page 404
4-3. Do-it-yourself maintenance Front turn signal lights Turn the bulb base counterclock- wise. Remove the light bulb.
Page 405
4-3. Do-it-yourself maintenance Back-up lights and rear turn signal lights Remove the bolts and rear com- bination assembly. Unplug connector while depressing the lock release. Turn the bulb bases counter- clockwise. Rear turn signal light Back-up light Remove the light bulb. Rear turn signal light Back-up light...
Page 406
4-3. Do-it-yourself maintenance High mounted stoplight Remove the screws and cover. Remove the light bulbs.
Page 407
4-3. Do-it-yourself maintenance License plate lights Remove the screw and light unit. Turn the bulb base counterclock- wise. Remove the light bulb.
Page 408
LED light bulbs The stop/tail and rear side marker lights consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. If two or more LEDs in a stop light burn out, your vehicle may not conform to local laws (SAE).
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 410
5-1. Essential information Vehicles with off-road package Towing hook Emergency towing procedure The engine switch must be in the ACC (engine off) or the ON (engine running) position. 4WD models: Put the front-wheel drive control switch in H2. Put the shift lever in N. Release the parking brake.
Page 411
5-1. Essential information NOTICE Emergency towing eyelet/hook precautions Before emergency towing, check that the eyelet/hook is not broken or damaged. Fasten the towing cable or chain securely to the eyelet/hook. Do not jerk the eyelet/hook. Apply steady and even force. To avoid damaging the eyelet/hook, do not pull from the side or at a verti- cal angle.
Page 412
5-1. Essential information Towing with a wheel lift-type truck from the front Vehicles with an automatic trans- mission: Use a towing dolly under the rear wheels. 2WD models with a manual transmission: We recommend to use a towing dolly under the rear wheels.
Page 413
5-1. Essential information Towing with a wheel lift-type truck from the rear 2WD models Turn the engine switch to the ACC position. 4WD models We recommend to use a towing dolly under the front wheels. When not using a towing dolly, turn the engine switch to the ACC position, shift the shift lever to N and put the front-wheel drive con-...
Page 414
5-1. Essential information Using a flat bed truck If your Toyota is transported by a Front flat bed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°.
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms l Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event.
Page 418
5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: l An agreement from the vehicle’s owner (or the leasing company for a leased vehicle) is obtained...
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* •...
Page 420
Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: •...
Page 421
5-2. Steps to take in an emergency Warning light Warning light/Details SRS warning light Indicates a malfunction in: • The SRS airbag system; • The front passenger occupant classification system; • The passenger airbag off switch (Access Cab mod- els); or •...
Page 422
• When the light stays on Have the system after blinking for 1 checked by your minute: Malfunction in Toyota dealer. the tire pressure warning system. Low fuel level warning light Refuel the vehicle. Low level of fuel.
Page 423
5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Engine oil replacement reminder light • Illuminates for about 3 Check the engine oil, seconds and then flashes and change if neces- for about 12 seconds: Indi- sary.
Page 424
If it is, tighten it securely. The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. Front passenger detection sensor and passenger seat belt reminder If luggage or other load is placed on the front passenger seat, depending on its weight, the reminder light to flash and buzzer to sound.
Page 425
If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.)
Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Toyota dealer. Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes.
Page 427
5-2. Steps to take in an emergency CAUTION Please note that the TPMS (tire pressure warning system) is not a sub- stitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light).
5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. Before jacking up the vehicle l Stop the vehicle on a hard, flat surface. l Set the parking brake. l Shift the shift lever to P (automatic transmission) or R (manual transmission).
Page 429
5-2. Steps to take in an emergency Access Cab models Tool bag Jack Double Cab models Tool bag Jack Taking out the jack and tool bag Regular Cab models Pull the lever and fold down the seatback.
Page 430
5-2. Steps to take in an emergency Unhook the strap and remove the tool bag. Loosen and remove the jack. Loosen Tighten Access Cab models Pull up the lever Raise the bottom cushion up. Turn the knob counterclockwise.
Page 431
5-2. Steps to take in an emergency Open the lid. Press the lid against the bot- tom of the lower cushion until it is supported by the hook- and-loop fastener. Make sure that the lid is sup- ported to prevent it from closing unexpectedly.
Page 432
5-2. Steps to take in an emergency Turn the knob counterclock- wise. Open the lid. Unhook the strap and remove the tool bag. Loosen and remove the jack. Loosen Tighten...
Page 433
5-2. Steps to take in an emergency Assemble the jack handle (in the tool bag) Assemble the jack handle exten- sion as shown. Be sure to tighten each screw securely. Taking out the spare tire Insert the end of the jack handle extension into lowering...
Page 434
5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Wheel Flat tire chock positions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of Left- the front...
Page 435
5-2. Steps to take in an emergency Remove the wheel ornament using the wheel nut wrench as shown. To protect the wheel and wheel ornament, place a rag between the wrench and the wheel ornament, as shown in the illustration. Type A Type B Type C...
Page 436
5-2. Steps to take in an emergency Slightly loosen the wheel nuts (one turn). Position the jack at the correct jack point as shown. Front Rear Make sure the jack is positioned on a level and solid place. Front Raise the vehicle until the tire is slightly raised off the ground.
Page 437
5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 438
5-2. Steps to take in an emergency Replacing an aluminum wheel with an aluminum wheel Tighten the nuts until the washer Washer of the nut comes into loose con- tact with the disc wheel. Disc wheel Lower the vehicle. Firmly tighten each nut two or three times in the order shown in the illustration.
Page 439
5-2. Steps to take in an emergency 4WD models and PreRunner Stowing the flat tire, jack and all tools Lay down the tire with the outer side facing up, and install the holding bracket. Then secure the tire, taking care that the tire goes straight up without catching on any other part, to prevent it from flying for- ward during a collision or sudden braking.
Page 440
5-2. Steps to take in an emergency CAUTION Using the jack Improper use of the jack may lead to death or injuries due to the vehicle suddenly falling off the jack. Do not use the jack for any purpose other than replacing tires or install- ing and removing tire chains.
Page 441
5-2. Steps to take in an emergency CAUTION Replacing a flat tire Never use oil or grease on the wheel bolts or wheel nuts. The oil or grease can cause the wheel nuts to loosen, causing a seri- ous accident. Remove any oil or grease on the wheel bolts or wheel nuts.
Page 442
5-2. Steps to take in an emergency CAUTION When the spare tire is attached The vehicle speed may not be correctly detected, and the following sys- tems may not operate correctly: ABS & Brake assist TRAC Active traction control system (if equipped) Hill-start assist control system (if equipped) Downhill assist control system (if equipped) AUTO LSD...
Page 443
When replacing the tires When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled cor- rectly.
One of the following may be the cause of the problem. l One or both of the battery terminals may be disconnected. l The battery may be discharged. (→P. 452) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
5-2. Steps to take in an emergency If you lose your keys New genuine Toyota keys can be made by your Toyota dealer using the key number stamped on your key number plate. Vehicles with engine immobilizer system, the dealer will also need the master key.
You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. Connect the jumper cables.
Page 448
Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible.
Page 449
5-2. Steps to take in an emergency Starting the engine when the battery is discharged (vehicles with an automatic transmission) The engine cannot be started by push-starting. Avoiding a discharged battery Turn off the headlights and the audio system while the engine is turned off.
Page 450
5-2. Steps to take in an emergency CAUTION Battery precautions Always wash your hands after handling the battery support, terminals, and other battery-related parts. Do not allow children near the battery. NOTICE To prevent damaging the vehicle (vehicles with a manual transmission) Do not pull- or push-start the vehicle, because the three-way catalytic con- verter may overheat and become a fire hazard.
If the fan is operating: Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fan is not operating: Stop the engine immediately and call your local Toyota dealer.
Page 452
Note that water draining from the air conditioning is normal if it has been used. Add engine coolant if required. Water can be used in an emer- gency if engine coolant is unavailable. (→P. 470) Have the vehicle checked at your nearest Toyota dealer as soon as possible.
Page 453
5-2. Steps to take in an emergency Overheating If you observe the following, your vehicle may be overheating. The engine coolant temperature gauge enters the red zone or a loss of power is experienced. Steam is coming from under the hood. CAUTION To prevent an accident or injury when inspecting under the hood of your vehicle...
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the engine. Set the parking brake and put the shift lever in P (vehicles with an automatic transmission) or N (vehicles with a manual transmission).
Page 455
5-2. Steps to take in an emergency NOTICE To avoid damaging the transmission and other components Avoid spinning the wheels and do not rev the engine. If the vehicle remains stuck after trying these procedures, the vehicle may require towing to be freed.
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions 2WD models except PreRunner Access Cab Cab type Regular Cab Except X-Runner X-Runner Overall length 190.4 in. (4835 mm) 208.1 in. (5285 mm) 74.0 in. Overall width 72.2 in. (1835 mm) (1880 mm) 66.1 in.
Page 457
Access Cab 4.0 L V6 850 lb. (386 kg) (1GR-FE) engine : Installing accessories in addition to those installed at the factory increases vehicle weight, thereby reducing vehicle capacity weight. Contact your Toyota dealer about the weight of accessory parts.
Page 458
(1GR-FE) engine Long deck : Installing accessories in addition to those installed at the factory increases vehicle weight, thereby reducing vehicle capacity weight. Contact your Toyota dealer about the weight of accessory parts. 4WD models Vehicle capacity Cab type Engine...
Page 459
Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 460
6-1. Specifications Access Cab models This number is also on the Certification Label. Engine number The engine number is stamped on the engine block as shown. 2.7 L 4-cylinder (2TR-FE) engine 4.0 L V6 (1GR-FE) engine...
Page 461
6-1. Specifications Engine 2.7 L 4-cylinder (2TR-FE) engine Model 2TR-FE Type 4-cylinder in line, 4-cycle, gasoline 3.74 × 3.74 in. (95.0 × 95.0 mm) Bore and stroke Displacement 164.3 cu.in. (2694 cm Drive belt tension Automatic adjustment Valve clearance (engine cold) Intake Automatic adjustment Exhaust...
Page 462
6.1 qt. (5.8 L, 5.1 Imp.qt.) Without filter 5.4 qt. (5.1 L, 4.5 Imp.qt.) Oil grade ILSAC multigrade engine oil Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the grade and viscosity shown below. Recommended oil viscosity...
Page 463
5.5 qt. (5.2 L, 4.6 Imp.qt.) Without filter 5.2 qt. (4.9 L, 4.3 Imp.qt.) Oil grade ILSAC multigrade engine oil Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the grade and viscosity shown below. Recommended oil viscosity Outside temperature *: 5W-30 is an oil that provides optimal levels of fuel efficiency.
Page 464
10.1 qt. (9.6 L, 8.5 Imp.qt.) Vehicles with a manual transmission 10.3 qt. (9.7 L, 8.5 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 465
Toyota Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent “Toyota Genuine Differential Gear Oil” is filled in your Toyota vehicle at factory fill. Oil type and viscosity Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification.
Page 466
: The fluid capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer. NOTICE Automatic transmission fluid type (4-speed models) Using automatic transmission fluid other than “Toyota Genuine ATF Type T- IV” may cause deterioration in shift quality, locking up of your transmission accompanied vibration,...
6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights — 60/55 Front fog lights 9145 Parking and front side — marker lights 4157 Front turn signal lights 27/8 Exterior Rear turn signal lights 3157A 27/8 Back-up lights License plate lights High mounted stoplight Interior light...
ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. If your engine knocks Consult your Toyota dealer.
Page 474
Toyota allows the use of oxygenate blended gasoline where the oxygenate content is up to 10% ethanol or 15% MTBE. If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87. Toyota does not recommend the use of gasoline containing methanol.
Page 475
6-1. Specifications NOTICE Notice on gasoline quality Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction. Do not use gasohol other than that stated here. Other gasohol may cause fuel system damage or vehicle performance problems.
6-1. Specifications Tire information Typical tire symbols Tire size (→P. 484) DOT and Tire Identification Number (TIN) (→P. 483) Location of treadwear indicators (→P. 373) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 477
6-1. Specifications Radial tires or bias-ply tires A radial tire has RADIAL on the sidewall. A tire not marked RADIAL is a bias-ply tire. Summer tire or all season tire (→P. 377) An all season tire has M+S on the sidewall. A tire not marked M+S is a summer tire.
Page 478
6-1. Specifications Tire size Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
Page 479
U.S.A. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 480
6-1. Specifications Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100.
Page 481
6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. Glossary of tire terminology Tire related term Meaning...
Page 482
6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as Occupant distribution specified in the third column of Table 1 below The combined weight of installed regular production options weighing over 5 lb.
Page 483
6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 484
6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a)The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on Intended outboard the other sidewall of the tire, or sidewall...
Page 485
6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between Ply separation adjacent plies A mechanical device made of rubber, chemicals, fabric and steel or other materials, Pneumatic tire that, when mounted on an automotive wheel, provides the traction and contains the gas or fluid that sustains the load A pneumatic tire in which the ply cords that...
Page 486
6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear designed to give a visual indication of the...
Programming these preferences requires specialized equipment and may be performed by an autho- rized Toyota dealership. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customized Item Function...
6-2. Customization Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference Engine oil maintenance After changing engine oil P.
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English.
National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchas- ers and/or prospective purchasers of Toyota vehicles with infor- mation on truck-camper loading. Your Toyota dealer will help answer any questions you may have as you read this informa- tion.
Page 493
CAUTION Loading precaution If a load is too far back, it can cause dangerous handling. If it is too far forward, the front axle may be overloaded. Cargo weight rating and proper matching When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the manufacturer’s camper weight figure, the weight of installed additional camper equipment not included in the manufacturer’s camper weight figure, the weight of camper cargo,...
Page 495
Gross axle and vehicle weight ratings Secure loose items to prevent weight shifts that could affect the bal- ance of your vehicle. When the truck camper is loaded, drive to a scale and weigh on the front and on the rear wheels separately to determine axle loads.
Page 496
GAWR GAWR Front Rear 2WD models except PreRun- 2380 lb. (1079 kg) 2685 lb. (1217 kg) Regular Cab models 3000 lb. (1360 kg) 4WD models and 2755 lb. (1249 kg) Access Cab and PreRunner Double Cab models 3110 lb. (1410 kg) GVWR 2WD models except PreRunner Cab type...
Page 497
4WD models Cab type GVWR Regular Cab 5100 lb. (2313 kg) Access Cab 5350 lb. (2426 kg) Double Cab 5450 lb. (2472 kg)
Page 498
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Two Wheel Drive Four Wheel Drive Anti-Lock Brake System Accessory Automatic Locking Retractor A-TRAC Active Traction Control AUTO LSD Automatic Limited Slip Differential Child Restraint System Downhill assist control Electronic Control Unit Event Data Recorder Emergency Locking Retractor GAWR Gross Axle Weight Rating...
Page 499
ABBREVIATIONS MEANING TPMS Tire Pressure Warning System TRAC Traction Control Treadwear indicators Vehicle Identification Number Vehicle Stability Control...
Page 500
Alphabetical index Alphabetical index A/C..........220 Audio input ......257 ABS ...........184 AUX adapter ......257 Access doors ......39 CD player ......237 Accessory meter ......156 MP3/WMA disc ..... 244 Active traction control Optimal use......253 system ........174 Portable music player ... 257 Air conditioning filter....388 Radio........
Page 501
Alphabetical index Break-in tips ......130 Removed wireless remote control battery precautions ......392 Camper information ....499 Seat belt extender Care precautions ......60 Exterior ......... 338 Seat belt precautions ....59 Interior ........340 Child-protectors ......37 Seat belts ......341 Cigarette lighter .......309 Cargo capacity ......
Alphabetical index Side mirrors......66 Overheating ......456 Downhill Assist Control Warning light ......424 System........181 Engine coolant Driver’s seat belt reminder Capacity ........ 470 buzzer ......427, 428 Checking ....... 363 Driver's seat belt reminder Preparing and checking light .........427, 428 before winter....... 201 Driving Temperature gauge ....
Page 503
Alphabetical index Front seats Wattage.........478 Adjustment ......45 Hill-start assist control ....184 Front side marker lights Hood..........353 Replacing light bulbs .... 407 Hooks Switch........157 Cargo net ......327 Wattage ........ 478 Deck hooks ......321 Front turn signal lights Shopping bag ......326 Lever ........
Alphabetical index Power steering Seat belts Fluid........366 Adjustment ......56 Power windows ......69 ALR .........58 Automatic Locking Retractor .......58 Radiator......355, 364 Child restraint system Radio ........231 installation......109 Rear seat Cleaning and maintaining..341 Adjustment ......50 ELR .........58 Folding down ......
Alphabetical index Shift lever Switch Automatic transmission ..141 A-TRAC switch...... 174 Four-wheel drive ....170 AUTO LSD switch ....176 If the shift lever cannot be Clutch start cancel switch ..183 shifted from P......450 Cruise control switch..... 163 Manual transmission .....144 DAC switch ......
Page 507
Alphabetical index Tire information Valet key ........30 Glossary ....... 487 Vanity mirrors......306 Size ........484 Vehicle identification Tire identification number ..483 number ........465 Uniform tire quality grading .. 485 Vehicle stability control...184 Tires VSC..........184 Chains ........202 Checking ......373 Warning buzzers If you have a flat tire .....
Page 508
Alphabetical index Washer Checking .......371 Preparing and checking before winter .......201 Switch........160 Washing and waxing ....338 Weight Cargo capacity ......195 Cargo weight rating ....500 Gross axle weight rating..502 Gross vehicle weight rating........502 Load limits ......199 Weight ........463 Wheels ........386 Window glasses ....69, 71 Window lock switch....69 Windows Power windows .......69...
What to do if... What to do if... A tire punctures If you have a flat tire P. 433 P. 449 If the engine will not start The engine does not start P. 76 Engine immobilizer system P. 452 If the vehicle battery is discharged If the shift lever cannot be shifted The shift lever cannot be P.
Page 510
What to do if... Instrument cluster Center panel...
Page 511
What to do if... nWarning lights Automatic transmission Brake system warning fluid temperature light P. 424 P. 426 warning light Charging system warning Slip indicator* light P. 425 P. 426 Tire pressure warning Low engine oil pressure light warning light P.
Cold tire inflation P. 475 pressure Engine oil capacity P. 468 (Drain and refill) Toyota Genuine Motor Oil or equivalent Oil grade: P. 468 ILSAC multigrade engine oil Engine oil type Recommended oil viscosity: SAE 5W-20 or 0W-20 (2.7 L 4-cylinder [2TR-FE] engine) SAE 5W-30 (4.0 L V6 [1GR-FE] engine)
Need help?
Do you have a question about the 2009 Tacoma and is the answer not in the manual?
Questions and answers