2-2. Instrument cluster
Returning to the previous screen
■
Select "RETURN" on the menu screen. Press and hold the "DISP"
button until the display changes.
System check display
■
After switching the "POWER" switch to ON mode, "SYSTEM CHECK" is dis-
played while system operation is checked. When the system check is com-
plete, the normal screen will return.
When using the multi-information
■
The display may seem dark and hard to see when viewed through sun-
glasses. Adjust the display (→P. 199, 202) or remove your sunglasses.
Liquid crystal display
■
Small bright spots or dots may appear on the liquid crystal display. This is a
particular characteristic of liquid crystal displays and does not indicate a mal-
function. No action is required.
Outside temperature display
■
When stopped, or driving at low speeds (less than 12 mph [20 km/h]), the
correct outside temperature may not be displayed, or the display may take
longer than normal to change.
Customization that can be configured at Toyota dealer
■
Setting of language selection can be changed.
(Customizable features →P. 567)
NOTICE
The multi-information display at low temperatures
■
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
204