Advertisement
Step 8
Carefully turn your unit over onto its front edges. Unfold
å
the BACK (K) and lay it over your unit.
Make equal margins along all four edges of the BACK (K). Push
å
on opposite corners of your unit if needed to make it "square".
Fasten the BACK (K) to your unit using the NAILS (TT).
å
Fasten the FOOT BASES (KK) to the BOTTOM (F). Use
å
eight SILVER 5/8" FLAT HEAD SCREWS (PP). Then, push
the FEET (JJ) into the FOOT BASES (KK).
NOTE: Turn the adjustable ends of the ADJUSTABLE
å
FEET completely in. Final adjustments will be made after
the unit is standing upright.
Fasten the METAL BRACKET (W) to the BOTTOM (F)
å
and FRONT SKIRT (Q). Use two BLACK 9/16" LARGE
HEAD SCREW (RR).
SILVER 5/8" FLAT HEAD SCREW
(8 used for the FOOT BASE)
JJ
Turn completely in.
These holes must be here.
Page 12
PP
(72 used for the BACK)
KK
F
Q
W
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
TT
NAIL
K
BLACK 9/16" LARGE HEAD SCREW
(2 used for the ANGLE BRACKET)
411965
LARGE DOOR ON LEFT
These holes must
line up over the
UPRIGHT (D).
RR
www.sauder.com/services
Advertisement
