Adjusting The Basic Position Of The Shift Lever - KTM 690 SMC R 2017 Owner's Manual

16 TUNING THE ENGINE
16.3

Adjusting the basic position of the shift lever

–
Remove screw
401950-12
–
Clean gear teeth
–
Mount shift lever
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle components
during the shift procedure.
–
Mount and tighten screw
401951-10
Guideline
Screw, shift lever

with the washers and take off shift lever

of the shift lever and shift shaft.

on the shift shaft in the required position and engage the gearing.

with the washers.
M6

.
14 Nm Loctite ® 243™
(10.3 lbf ft)
148