13
WHEELS, TIRES
13.1
Removing the front wheel
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
Main work
–
Remove screw
–
Remove screws
–
Press back the brake linings with a light lateral tilting of the brake caliper on the brake
disc. Pull the brake caliper carefully back from the brake disc and hang it to one side.
Info
Do not pull the hand brake lever while the brake caliper is removed.
101995-10
–
Loosen screw
–
Unscrew screw
spindle out of the axle clamp. Remove screw
Warning
Danger of accidents Damaged brake discs reduce the braking effect.
–
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
101996-10
fork.
and pull wheel speed sensor
and spacers
.
and screws
.
about 6 turns and press your hand on the screw to push the wheel
Always lay the wheel down in such a way that the brake disc is not damaged.
p. 71)
p. 72)
out of the hole.
.
103