Cleaning The Filter In The Water Inlet - Miele WT 2789 i WPM Operating Instructions Manual

Cleaning the filter in the water
inlet
The machine has a filter to protect the
water inlet valve.
The accessible filter in the union in the
open end of the inlet hose should be
checked every six months, or more
often if there are frequent interruptions
to the external water supply.
^ First turn off the stopcock and then
unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
^ Remove the rubber seal 1 from the
recess.
^ Hold the free end of the inlet hose
upside down. The plastic filter 2 will
fall out.
^ Clean the plastic filter.
^ Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is watertight. If it leaks,
tighten the connection.
Cleaning and care
Never forget to put the filter back in
place after cleaning.
55