Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Article Name
1
Status Indicator
2
Disk Indicator
3
Drive Tray Lock
4
USB 3.0 Port
5
Power Button
6
LAN Port
7
RESET Button
8
eSATA Port
9
Power Port
10
Fan
11
Kensington Security Slot
12
USB 3.0 Port
1
For more information about Synology Expansion Unit supported by your DiskStation, please visit www.synology.com.
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "Appendix B:
LED Indicator Table".
Displays the status of the installed drive. For more information, see
"Appendix B: LED Indicator Table".
Lock or unlock drive trays.
Front Panel
Connect external drives or other USB devices to the DiskStation here.
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep
sound and the Power LED starts blinking.
Connect network cables here.
1. Press and hold until you hear a beep sound to restore the default IP
address, DNS server, and passwords for the admin account.
2. Press and hold until you hear a beep sound, then press and hold
again until you hear three beep sounds to return the DiskStation to
"Not installed" status so that DiskStation Manager (DSM) can be
reinstalled.
Connect external SATA drives or Synology Expansion Unit
Back Panel
DiskStation here.
Connect the AC power adapter here.
Disposes of excess heat and cools the system. If the fan malfunctions,
the DiskStation will emit a beeping sound.
Attach a Kensington security lock here.
Connect external drives or other USB devices to the DiskStation here.
Description
1
to the
Advertisement
Table of Contents
