Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Article Name
1
Status Indicator
2
LAN Indicator
3
Disk Indicator
4
Power Button
5
Fan
6
USB 2.0 Port
7
RESET Button
8
LAN Port
9
Power Port
Kensington
10
Security Slot
4 Chapter 1: Before You Start
Location
Displays the status of the installed drives. For more information, see "Appendix B:
LED Indicator Table".
Displays the status of the network connection. For more information, see
"Appendix B: LED Indicator Table".
Front Panel
Displays the status of the installed drive. For more information, see "Appendix B:
LED Indicator Table".
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep sound and
the Power LED starts blinking.
Disposes of excess heat and cools the system. If the fan malfunctions, the
DiskStation will emit a beeping sound.
Connect external hard drives, USB printers, or other USB devices to the
DiskStation here.
1. Press and hold until you hear a beep sound to restore the default IP address,
DNS server, and password for the admin account.
2. Press and hold until you hear a beep sound, then press and hold again until
Back Panel
you hear three beep sounds to return the DiskStation to "Not Installed" status
so that DiskStation Manager (DSM) can be reinstalled.
Connect a network cable here.
Connect the AC power adapter here.
Attach a Kensington security lock here.
Description
Advertisement
Table of Contents
