Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Article Name
1
Status Indicator
2
Disk Indicator
3
USB 3.0 Port
4
Power Button
5
Fan
6
LAN Port
7
RESET Button
Kensington
8
Security Slot
9
USB 3.0 Port
10
Power Port
11
eSATA Port
1
For more information about Synology Expansion Unit supported by your DiskStation, please visit www.synology.com.
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "Appendix B:
LED Indicator Table".
Displays the status of the installed drive. For more information, see "Appendix
B: LED Indicator Table".
Front Panel
Connect external drives, USB printers, or other USB devices to the
DiskStation here.
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep sound
and the Power LED starts blinking.
Disposes of excess heat and cools the system. If the fan malfunctions, the
DiskStation will emit a beeping sound.
Connect network cables here.
1. Press and hold until you hear a beep sound to restore the default IP
address, DNS server, and passwords for the admin account.
2. Press and hold until you hear a beep sound, then press and hold again
until you hear three beep sounds to return the DiskStation to "Not installed"
status so that DiskStation Manager (DSM) can be reinstalled.
Back Panel
Attach a Kensington security lock here.
Connect external hard drives, USB printers, or other USB devices to the
DiskStation here.
Connect the AC power adapter here.
Connect external SATA drives or Synology Expansion Unit
here.
Description
1
to the DiskStation
Advertisement
Table of Contents
