Synology DiskStation DS1522+ Hardware Installation Manual

Synology DiskStation DS1522+ Hardware Installation Manual

Advertisement

Synology NAS DS1522+
Hardware Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DiskStation DS1522+ and is the answer not in the manual?

Questions and answers

Summary of Contents for Synology DiskStation DS1522+

  • Page 1 Synology NAS DS1522+ Hardware Installation Guide...
  • Page 2: Table Of Contents

    Tools and Parts for Component Installation Install Drives Start up Your Synology NAS Add a Memory Module to Synology NAS Add an M.2 NVMe SSD to Synology NAS Install Network Upgrade Module Chapter 3: Install DSM on Synology NAS Install DSM with Web Assistant...
  • Page 3: Package Contents

    Chapter Before You Start Thank you for purchasing this Synology product! Before setting up your new Synology NAS, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your Synology NAS.
  • Page 4: Synology Ds1522+ At A Glance

    Disposes of excess heat and cools the system. If the fan malfunctions, the Synology NAS will emit a beeping sound. Kensington Security Slot Attach a Kensington security lock here. For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com. 4 Chapter 1: Before You Start...
  • Page 5: System Modes And Led Indicators

    System Modes and LED Indicators System Modes and Definitions There are 7 system modes in Synology NAS. The System modes and their definitions are as below: System mode Definition Synology NAS is powering on when you press the power button or restarting when Powering on you run operations in DSM.
  • Page 6 • Enter hibernation then wake up from hibernation: DSM is ready for use > Hibernation > DSM is ready for use • Shutdown Synology NAS: DSM is ready for use > Shutting down > Powered off • Power failure with UPS attached: DSM is ready for use >...
  • Page 7: Other Led Indicators

    > HDD/SSD for more information. 2 Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in S.M.A.R.T.
  • Page 8: Hardware Specification

    • Operating Temperature: 32 to 104˚F (0 to 40˚C) • Storage Temperature: -5 to 140˚F (-20 to 60˚C) • Relative Humidity: 5% to 95% RH Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information. 8 Chapter 1: Before You Start...
  • Page 9: Spare Parts

    System Fan 92*92*25 mm Adapter 120W_1 Adapter 120W Level VI Optional Accessories With Synology accessories, you can customize your Synology NAS to fit different business environments without www.synology.com/compatibility worrying about compatibility and stability. Visit for more information. 9 Chapter 1: Before You Start...
  • Page 10: Safety Instructions

    Safety Instructions Keep away from direct sunlight and away from chemicals. Ensure a stable environment with no abrupt changes in temperature or humidity. Place the unit right side up at all times. Keep the unit away from liquids. Before cleaning, unplug the power cord. Do not use chemical or aerosol cleaners. Wipe with damp paper towels.
  • Page 11: Chapter 2: Hardware Setup

    Chapter Hardware Setup Tools and Parts for Component Installation Please prepare below tools and parts before setting up your Synology NAS: • A screwdriver (only for 2.5" drives) • At least one 3.5" or 2.5" SATA drive (please visit www.synology.com/compatibility...
  • Page 12 3 Insert the loaded drive tray into the empty drive bay and push it back until you hear a click when the tray is locked into place. 4 Repeat the steps above to install the other drives you have prepared. Note: Make sure that the drive tray is completely inserted.
  • Page 13: Start Up Your Synology Nas

    1 Use the LAN cable to connect the Synology NAS to your switch, router, or hub. 2 Connect one end of the AC power adapter to the power port of your Synology NAS. Connect one end of the AC power cord to the AC power adapter, and the other to the power outlet.
  • Page 14: Add A Memory Module To Synology Nas

    4 Hold the memory module by its edges and remove it from the slot. 5 Insert the drive trays back into the drive bays. 6 Reconnect the cables removed in step 1, then press the power button to turn on your Synology NAS. 14 Chapter 2: Hardware Setup...
  • Page 15 To install the memory module 1 Follow step 1 and 2 of the "To remove the memory module" section to shut down your Synology NAS, disconnect the cables and remove the drive trays. 2 Insert the new memory module into the empty slot: 1 Align the small gap between the gold connectors of the memory module with the notch on the empty slot.
  • Page 16: Add An M.2 Nvme Ssd To Synology Nas

    Add an M.2 NVMe SSD to Synology NAS You can install up to two M.2 NVMe 2280 SSDs on your Synology NAS to create an SSD cache volume. Follow the steps below for SSD module installation and removal. To install an M.2 NVMe SSD module 1 Shut down your Synology NAS.
  • Page 17: Install Network Upgrade Module

    Install Network Upgrade Module Your Synology NAS has a Network Upgrade slot which allows you to install network upgrade module for LAN port expansion. To install a network upgrade module 1 Shut down your Synology NAS. Disconnect all cables from your Synology NAS to prevent possible damage.
  • Page 18: Chapter 3: Install Dsm On Synology Nas

    3 Enter either of the following into the address bar of your browser: find.synology.com synologynas:5000 4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the local network. The status of your DS1522+ should be Installed.
  • Page 19 Section 5. License Limitations. The license set forth in Sections 1, 2 and 3 applies only to the extent that you have ordered and paid for the Product and states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA.
  • Page 20 Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis.
  • Page 21 Section 3. Limited Warranty and Remedies 3.1 Limited Warranty. Subject to Section 3.2, Synology warrants to the Customer that each Product (a) will be free of material defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published specifications for the Product during the Warranty Period.
  • Page 22 Section 4. Limitations of Liability 4.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its reasonable control (including, without limitation, any act or failure to act by Customer).
  • Page 23 Arbitration Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall be held in King County, Washington, U.S.A.
  • Page 24 5.9 Entire Agreement. This Warranty constitutes the entire agreement, and supersedes any and all prior agreements, between Synology and Customer related to the subject matter hereof. No amendment, modification or waiver of any of the provisions of this Warranty will be valid unless set forth in a written instrument signed by the party to be bound thereby.
  • Page 25 FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 26 この装置は、クラス B 機器です。この装置は、住宅環境で使用することを 目的 としていますが、この装置がラジオやテレビジョン受信機に近接して使 用され ると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 VCCI 一 B...

Table of Contents