Table of Contents
Advertisement
Available languages
Available languages
en - Installation notes
26
The fittings supplied are for bolting the machine to a concrete floor.
If other floor types are present at the installation site, the fastening
material must be ordered by the customer.
Installing the machine on ships
On other types of floor structures (in cases where the machine is be-
ing installed on sea-going vessels, for example), the fixing materials
must be provided on site.
For installation on sea-going vessels, the machine must be secured to
prevent slipping and tipping by fastening it to the floor of the vessel
(e.g. using clamps that are welded to the floor of the vessel).
All 4 of the machine's feet must be secured.
Installation on concrete plinth
The washing machine can be installed on a concrete plinth if desired.
The concrete materials and the durability of the concrete plinth must
be assessed in accordance with the floor load bearing capacity
given in "Technical data".
To guarantee the stability of the washing machine, make sure that
the concrete plinth is sufficiently stable on the floor and that it is
capable of withstanding any burden or force from the washing ma-
chine.
The washing machine must be secured to the concrete plinth using
the fixtures and fastenings supplied.
The washing machine must be secured to the plinth immedi-
ately after installation!
There is a risk of the washing machine falling off a raised plinth dur-
ing a spin cycle if it is not secured.
Levelling the machine
Align the washing machine vertically and horizontally using the ad-
justable feet and a spirit level.
The washing machine must stand evenly and horizontally on all four
feet to ensure trouble-free and energy-efficient operation. Otherwise
the water and energy consumption increases and the washing ma-
chine might move around.
Advertisement
Chapters
Table of Contents
