Table of Contents
Advertisement
TOC
Section 1: Getting Started
A. INTRODUCTION
Thank you . . .
. . . for purchasing a ADL-100 Autoloader. This device
automates the transport of up to 100 optical discs (CD-R,
DVD-R, etc.) per batch into and out of a Primera Technology
Accent Disc Laminator. Designed for reliable, unattended
operation, the ADL-100 will automatically and effortlessly
transport anything from a just a few CDs to hundreds or
thousands of discs per day. The ADL-100 is suitable for use
in office or production environments and fits conveniently on
any desktop.
To begin using your new ADL-100, please read this entire
manual carefully. You will also need to reference the
Operator's Manual for the Disc Laminator you'll be using with
the ADL-100, so be sure to have it handy before proceeding.
B. CHOOSING A GOOD
•
Place ADL-100 in a location with adequate air circulation
to prevent internal heat build up. You'll need a tabletop
with at least 30" (76cm) of depth for adequate clearance.
•
Do not place the unit near heat sources such as radiators or
air ducts, or in a place subject to direct sun-light, excessive
dust, mechanical vibration or shock.
C.
UNPACKING
Before you begin, make sure that you have the following items:
•
ADL-100 Autoloader, including Power Supply and
Input/Output Bins
•
Accent Disc Laminator with power cord
•
Accent Disc
Laminator Stand with
•
mini-DIN)
You'll also want to save the box and packing materials. It
makes transporting or shipping your ADL-100 much easier
if this is ever needed some time in the future.
LOCATION
AND INSPECTION
Laminator Stand
Laminator Control Cable (6-pin
INDEX
Getting Started 1
Advertisement
Table of Contents
