Table of Contents
Advertisement
TOC
Section 3: Interpreting the LED
The
LED Status
tell you a lot about what is happening at any given moment
with the operation of the autoloader. To accurately interpret
what is meant when the lights are on, off or flashing, refer to
the following chart:
A. POWER LED
Status
Off
On Solid
Flashing
B. PAUSE LED
Status
Off
On Solid
Flashing
Status Lights
Lights, located on ADL-100's front panel, can
Condition
No Power. Plug in Power Adapter.
Power is ON. This is ADL-100's normal
"waiting" mode.
Power is ON, but an error condition exists:
a. Didn't pick up a disc
b. Dropped a disc
c. Discs out
d. Robotic arm stalled; probably hit something
while moving. Press any button on Control
Panel to re-try.
Condition
Normal "waiting" mode
ADL-100 is paused.
ADL-100 is busy; i.e. motors are running,
Laminator is laminating, etc.
Interpreting the LED Status Lights 7
INDEX
Advertisement
Table of Contents
