Step 4: Installing The Ink Cartridge; Step 5: Aligning The Cartridge - Primera Bravo Se User Manual

TOC

Step 4: Installing the Ink Cartridge

With the cover open, press the Power/Ink Button to move
•
the Ink Cartridge Carrier to the load position.
Open the cartridge cover by pressing down on the tab.
•
Remove the ink cartridge from its packaging.
•
• Slowly remove the tape covering
the cartridge's print head.
DO NOT TOUCH THE COPPER AREA!
• Insert the ink cartridge into the carrier,
copper end first and snap the cartridge
cover in place.
• Close the Publisher's front cover.
Step 5: Aligning the Cartridge
If you are using a PC
the cartridge.
If you are using a Mac
cartridge before you print for the first time.
Note: An alignment print is required every time you install a new
cartridge. The software will always prompt you to align the
cartridges. Make sure there is an unprinted disc in the bin for
this alignment.
the Installer will prompt you to align
you will be prompted to align the
Hardware and Software Setup
INDEX
13