Primera Bravo II User Manual page 44

TOC
Click Browse then select the desired file of type.
File of Type
You can then browse to the desired file.
If you are using a JPG or BMP designed in another program,
here are some hints for designing a successful label:
Create the image as a 120mm by 120mm square. If your
•
image is too large, the PTBurn Server will automatically
resize it and center it on the disc area. If it is not
symmetrical, it will center it on the disc proportionately so
you may see some white or non-printed areas on the disc.
• The PTBurn Server will crop the image to the shape of a
disc for you. If you try to crop out areas for the outer and
inner diameter of the disc, and you are not perfectly
accurate you will end up with an egg shaped or misshapen
print area on the disc. If you flood the entire area of the
disc with color, you will have a perfectly formed print area
on the disc.
• If you want to create a template in a drawing application
such as Illustrator or Corel, start with a 120mm square
document with no margins. Center a 120mm transparent
circle on the document to see the outer diameter of the disc.
If using Primera's TuffCoat discs, center a 38mm
transparent circle on the inner diameter of the document to
show the inner diameter area of the disc. Note that the
center size of discs may vary from manufacturer to
manufacturer.
• Create your image using the circles as a guide. When
finished, remove the circles from the guide and export the
image at 300 dpi as a JPG or BMP .
40 Using PTBurn Client to Submit a Job
INDEX