Primera Bravo II User Manual page 32

TOC
• The PTBurn Server will crop the image to the shape of a
disc for you. If you try to crop out areas for the outer and
inner diameter of the disc, and you are not perfectly
accurate you will end up with an egg shaped or misshapen
print area on the disc. If you flood the entire area of the
disc with color, you will have a perfectly formed print area
on the disc.
• If you want to create a template in a drawing application
such as Illustrator or Corel, start with a 120mm square
document with no margins. Center a 120mm transparent
circle on the document to see the outer diameter of the disc.
If using Primera's TuffCoat discs, center a 38mm
transparent circle on the inner diameter of the document to
show the inner diameter area of the disc. Note that the
center size of discs may vary from manufacturer to
manufacturer.
• Create your image using the circles as a guide. When
finished, remove the circles from the guide and export the
image at 300 dpi as a JPG or BMP .
If you do not want to use a SureThing Design or Image file, but
only wish to print a simple line of text on the disc, enter the text
in the Custom Text Window. There is a standard template that
PTBurn Server will use for your image and will insert the
custom text in to the template for you.
Custom Text Field
5. Once you have selected your
will bring up the Burn Window
In the Burn window, name your Job (or use the default job name
generated by the Client).
28 Using PTBurn Client to Submit a Job
INDEX
Print File, click Next. This