Table of Contents
Advertisement
TOC
System. This setting automatically adjusts the color of your
image according to predetermined printer profiles and default
system profiles. This results in a very precise color match when
attempting to print photographic images.
Dither Mode
Dither Mode refers to the method used by your printer when
arranging the dots of ink to make an image on your disc. Select
Optimize for photos if printing a design primarily composed
of photographic images. Select Optimize for graphics if mainly
printing text, lines, and graphics.
Ink Saturation
This option controls the ink saturation of the printed image.
When printing onto the printer manufacturer's TuffCoat CD
media, this option can be left at its default setting of 50%.
When printing onto other brands of printable CD media, you
may need to adjust this control in order to optimize the ink
saturation for the printable surface of your specific CD media.
Click on the up and down arrows to change the ink saturation
setting. Lower numbers reduce the overall ink saturation,
while higher numbers increase it.
Inner Diameter
This value changes the size of the non-printed center. Larger
numbers cause the non-printed center to be larger and smaller
numbers make the non-printed center smaller. This number is
incremented by 0.1mm so a change of 10 for inner diameter
changes the diameter by 1mm.
Inner Diameter
440
383
150
Centering Test Print
NOTE: Your printer comes from the factory pre-calibrated to print the image
in the center of the CD. You can use this adjustment if you need to
fine-tune this location.
If you ever wish to verify your factory-calibrated Vertical and
Horizontal calibration settings, you can run a simple
calibration procedure to assure that your images will be
Non-Printed Diameter
1.733" (44mm) (Default)
1.507" (38.3mm) (TuffCoat
0.591" (15mm) (Physical Center)
INDEX
)
TM
Creating Discs 19
Advertisement
Table of Contents
