Using Kiosk Mode - Primera BravoPro autoprinter User Manual
Automated optical disc duplication & printing system
Hide thumbs
Also See for BravoPro autoprinter:
- Connection manual (2 pages) ,
- User manual (2 pages) ,
- User manual (48 pages)
Table of Contents
Advertisement
TOC
D. USING KIOSK MODE
Kiosk Mode
doubling your disc capacity from 50 discs to 100 discs. In this
mode, the finished discs will be deposited out through the
front "reject area" of the Printer. In Kiosk mode all discs would
be ejected in this manner. Rejects can be identified in the
stack because they will not be printed in the same manner as
successfully recorded discs. Refer to the Kiosk Kit installation
instructions below.
Attach the Output Bin
•
Holder as shown,
aligning the Locating
Tabs on the Output
Bin Holder with the
Slots located on the
underside of the
Printer allowing the
holder to hang off the
edge of the table.
Notice the slots do
allow for adjusting
the position of the
output bin. If your
discs are not falling
into the bin, you will
be able to move the
bin slightly to align it.
Place the Output Bin
•
on the Output Bin
Holder as shown.
Printing Discs on a PC
22
allows you to use both of Printer's Bins as input,
Slots
INDEX
Locating Tabs
Advertisement
Table of Contents
