Laufen KARTELL 2.2233.2 Installation Instructions Manual

KARTELL BY LAUFEN
FREESTANDING BATH

SOLID SURFACE CARE INSTRUCTIONS

Everyday clearing of the Graphyd® products
To keep Graphyd® products clean please follow some simple rules.
The best method to remove stains from soap and water which can appear
during everyday use is to wipe up spills as they occur. Just use a soft damp
cloth (i.e. cotton).
To remove stains which need more attention use the cleaning cream milk or
the detergents dedicated to day-to-day cleaning of bathroom.
The removal of the limescale and of the rust should be done by the soft damp
cloth and the detergent for those kind of stain.
After the product clearing rinse all areas thoroughly with hot water removing
the detergent from all surfaces. We recommend to towel whole product to
keep Grapyd In perfect condition.
It is recommended to protect the surface of the product with the additional
coating before first use of composite material products.
Resistant stains
All strong stains caused by e.g. cosmetics, coffee, wine, cigarette ash or
detergents should be removed immediatelly by taking out the substance excess
with a soft cloth. Then apply a cleaning method, as in the case of daily care.
If the stain is not removed we can use slightly abrasive preparations (Cif, cream
milk). The cream milk should be applied on the stain with a soft, damp cloth. It's
necessary to remove the stain by circular movements. For stronger dirt we can
use fine-grained sandpaper.
Don't risk it, use a licensed plumber. ™
Renew of
Scratches
General r