Advertisement
Quick Links
IL BAGNO ALESSI
Sentec solid surface
Art.-No. 2.4597.2.000.000.A, 183 x 87
This instruction must be given to the user.
EN
Guarantee/Liability only when assembled by an approved specialist in accordance with the instructions and local regulations.
EN
Bathtub
Australia
New Zealand
Art.-No. 2.4597.1.000.000.A, 178 x 82
Advertisement
Related Manuals for Laufen ALESSI 2.4597.2.000.000.A
Summary of Contents for Laufen ALESSI 2.4597.2.000.000.A
- Page 1 Bathtub IL BAGNO ALESSI Sentec solid surface Australia New Zealand Art.-No. 2.4597.2.000.000.A, 183 x 87 Art.-No. 2.4597.1.000.000.A, 178 x 82 This instruction must be given to the user. Guarantee/Liability only when assembled by an approved specialist in accordance with the instructions and local regulations.
- Page 2 This connection must absolutely be effected by a qualified specialist. After connecting the water supply and drainage pipes, the tub must be examined to ensure that it is waterproof. Changes allowed: Laufen reserves the right to make changes or modifications on any of its products without notice.
- Page 3 Dimensions inches (mm) Art.-No. 2.4597.2.000.000.A ø2“ (50) 50“ (1270) 2.4“ 2.4“ 65.4“ (1660) (60) (60) 71“ (1800) Art.-No. 2.4597.1.000.000.A ø2“ (50) 50“ (1270) 2.4“ 2.4“ 65.4“ (1660) (60) (60) 71“ (1800) 2587 Ib (310 kg) 2.4597.2.000.000.A 2.4597.1.000.000.A “ “...
- Page 4 Parts list Art.-No. 2.4597.2.000.000.A Art.-No.: 2.9497.3.000.000.A Art.-No.: 2.9511.7.004.000.1 Tub assembly installation instructions...
- Page 5 Tub assembly installation instructions The following red marked installation components are not included in delivery. They are shown as examples to identify a proper installation. “ “ MAX. MAX. ø40/42 mm only for state Victoria...
- Page 6 Tub assembly installation instructions 24 h...
- Page 7 Parts list Art.-No. 2.4597.1.000.000.A Art.-No.: 2.9033.7.000.000.1 Tub assembly installation instructions Ø 8...
- Page 8 Parts list, tub assembly installation instructions The following red marked installation components are not included in delivery. They are shown as examples to identify a proper installation. “ “ ø40/42 mm only for state Victoria...
- Page 9 Tub assembly installation instructions MAX. MAX. 24 h...
- Page 10 General Information, Maintenance Instructions These stains and spots as well as scratches or other General comments on operation and use small damages can be removed following the recom- modations below: For your safety bathtub temperature should not Remove heavy dirt with liquid household cleaner e.g. exceed 40°C.
- Page 11 Warranty/Liability Provision 2-Year Limited Warranty. The buyer/installer may be charged a reasonable rate Laufen warrants that the enclosed product shall be for shipping if the product is repaired or a replacement free from manufacturing defects for 2 years from the is provided.
- Page 12 Controllers name: Laufen Bathrooms AG Date: Wahlenstrasse 46 CH-4242 Laufen, Switzerland Fabrication number: www.laufen.com...
Need help?
Do you have a question about the ALESSI 2.4597.2.000.000.A and is the answer not in the manual?
Questions and answers