Philips sonicare ProtectiveClean 4700 Manual page 22

22
English
Travel case
Cleaning the Sanitizer
Rinse with warm water and use a damp cloth to clean
inside of travel case.
Warning: Do not immerse the sanitizer in water or
rinse it under the faucet.
Warning: Do not clean the sanitizer when the UV
light bulb is hot.
For optimal effectiveness, it is recommended to clean
your sanitizer weekly.
1 Unplug the sanitizer.
2 Pull the drip tray straight out. Rinse the drip tray and
wipe it clean with a damp cloth.
3 Clean all interior surfaces with a damp cloth.
4 Remove the protective screen in front of the UV light
bulb.
To remove the screen, grasp the edges next to the
snaps, gently squeeze and pull out the protective
screen.
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of the
metal clasp.
6 Clean the protective screen and the UV light bulb with
a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the light
bulb with the metal clasp and push the bulb into the
clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen
with the slots on the reflective surface near the UV
light bulb. Push the screen straight into the slots on
the sanitizer.
9 Place the drip tray back in the UV sanitizer.
10 After cleaning, make sure the sanitizer is completely
dry before you connect it to the mains.