Using The Studio-Series Interfaces With Popular Audio Applications - PRESONUS Studio 1810c Owner's Manual

3 Connecting to a Computer
3.4

Using the Studio-series interfaces with Popular Audio Applications

3.4 Using the Studio-series interfaces with Popular Audio Applications
Ableton Live
Apple Logic
Avid ProTools 10+
Cakewalk Sonar
Complete setup instructions for Studio One Artist and a brief tutorial on
its features can be found in Section 5 of this manual. However, you can
use your Studio-series interfaces with any audio-recording application
that supports Core Audio or ASIO. Please consult the documentation that
came with your audio application for specific instructions on how to select
the Studio-series driver as the audio-device driver for your software.
Below are basic driver-setup instructions for a few popular audio applications.
1. Launch Ableton Live
2. Go to Options | Preferences | Audio
3. Choose Driver Type: Asio | Audio Device: ASIO PreSonus Studio (1824c or
1810c)
4. Go to Input Config: Enable and select the desired Input channels.
5. Go to Output Config: Enable and select the desired Output channels.
1. Launch Logic.
2. Go to Logic | Preferences | Audio.
3. Click on the Devices Tab.
4. Select PreSonus Studio (1824c or 1810c) from the device menu.
5. You will be asked if you'd like to relaunch Logic. Click try (re)launch.
6. Your Studio-series interface features custom I/O labels for faster workflow. To
enable these labels for use in Logic, go to Options | Audio | I/O Labels.
7. The second column in the pop-up window will be named Provided by Driver.
Activate each of these labels for your Studio-series interface. When you are done,
close this window.
1. Launch ProTools.
2. Go to Setup | Hardware and select Studio (1824c or 1810c) from the Peripherals
list. Click OK.
3. Go to Setup | Playback Engine and select Studio (1824c or 1810c) from the
menu at the top of the window. Click OK.
1. Launch Sonar.
2. Go to Options | Audio... and click on the Advanced tab.
3. Change the Driver Mode to "ASIO. " (Note: Using WDM, rather than ASIO, for pro-
audio applications is not recommended.)
4. Click the "OK" button.
5. Restart Sonar.
Studio Series 1810c and 1824c
Owner's Manual
10