Monitor Mixing With Z-Mix - PRESONUS Studio 1810c Owner's Manual

5 Studio One Artist Quick Start
5.4

Monitor Mixing with Z-Mix

Drag-and-Drop Effects
Drag-and-Drop Audio and MIDI Files
5.4 Monitor Mixing with Z-Mix
To add a plug-in effect to a track, click the Effects button in the Browser and
select the plug-in or one of its presets in the effects browser. Drag-and-drop
the selection over the track to which you would like to add the effect.
Audio and MIDI files can be quickly located, auditioned, and imported into
your Song by dragging them from the file browser into the Arrange view.
If you drag the file to an empty space, a new track will be created with
that file placed at the position to which you dragged it. If you drag the file
to an existing track, the file will be placed as a new part of the track.
PreSonus interface customers can set up zero-latency monitor mixes using
Studio One's unique Z-Mix feature. This feature takes over the monitor mix
control software for the Studio-series interfaces and provides level and pan
control from within Studio One. Simply designate a pair or pairs of outputs
as a "Cue Mix, " and you'll find the Z-Mix controls in your Studio One mixer.
As previously mentioned, Universal Control must be operating in the background
for Z-Mix functions to be available for your Studio-series interfaces.
zero-latency monitoring for live inputs. When the main output is designated as a Z-Mix, a
Zero Latency button will appear on any audio channel with an assigned audio input in
the Console, below the Mute, Solo, Record, and Monitor buttons.
Studio Series 1810c and 1824c
You can create a cue mix and send it to any
output on your Studio-series interface. You
simply need to create an output bus and
enable Cue Mix.
Power User Tip: It is possible to designate the
main output in as a cue mix. This is helpful if you
often record yourself and require quick access to
Owner's Manual
29