Installation For Macos; Using The Studio-Series Interfaces With Popular Audio Applications - PRESONUS Studio 26c Owner's Manual

3 Connecting to a Computer
3.2

Installation for macOS

Installation for macOS
3.2
3.3

Using the Studio-series interfaces with Popular Audio Applications

Steinberg Cubase 4+
Ableton Live 5+
Apple Logic Pro/Express 7+:
Your Studio-series interface is a class-compliant Core Audio device in
macOS. No driver installation is necessary for any Studio-series device.
Power User Tip: When installation is complete, you will find the Universal Control
application in your Applications folder. From this application, you can launch UC Surface.
It is recommended that you place this in your Dock for easy access.
Complete setup instructions for Studio One Artist and a brief tutorial on its
features can be found in Section 4 of this manual. However, you can use your
Studio-series interface with any audio-recording application that supports
Core Audio or ASIO. Please consult the documentation that came with
your audio application for specific instructions on how to select the Studio-
series interface driver as the audio-device driver for your software.
Below are basic driver-setup instructions for a few popular audio applications.
1. Launch Cubase.
2. Go to Devices | Device Setup.
3. Select "VST Audio System" from the Devices column in the Device Setup.
4. Select your Studio-series interface from the ASIO Driver dropdown list.
5. Click "Switch" to begin using the Studio-series Driver.
6. Once you have successfully changed the driver, go to Devices |
VST Connections to enable your input and output buses.
1. Launch Ableton Live.
2. Go to Options | Preferences | Audio.
3. Choose Driver Type: ASIO | Audio Device: ASIO [Studio-series interface]
4. Go to Input Config : Enable and select the desired Input channels.
5. Go to Output Config : Enable and select the desired Output channels.
6. You may now select your Studio-series interface inputs
and outputs for each track created in Live.
1. Launch Logic Pro/Express.
2. Go to Logic | Preferences | Audio.
3. Click on the Devices Tab.
4. On the Core Audio tab, check Enabled.
5. Select your Studio-series interface from the device menu.
Studio 26c and Studio 68c
Owner's Manual
13