Sunnydaze Decor FWD-464 Manual

FRENCH - INSPIRED FLOURISHING
OUTDOOR WATER FOUNTAIN
Read assembly instructions carefully and follow the care instructions. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.

ASSEMBLY

1. Locate the water tube inside the fountain. Firmly connect the tube to the recirculating pump and place it in
the basin of the fountain.
2. Run the pump power cord up through the opening in the back of the fountain.
3. Fill the fountain with enough water to keep the pump fully submerged during operation, approximately
3.5 gallons.
4. Plug the power cord into a properly grounded GFCI outlet.
HELPFUL HINT
When first plugged in, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
FD50104
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
FWD-464
11/2021
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Parts
Fountain
Electric Submersible Pump
String Rocks
The water tube is built into the fountain.
NOTE:
Take care when handling the water tube; detaching
the water tube from the fountain will damage the
fountain and void the product warranty.
https://tiny.cc/SunnydazeWarranty
Qty.
1
1
1 SET
Page 1 / 2