Page 1
61" 3-Tier Cornucopia Water Fountain(LZH-087) Part Description Quantity Part Description Quantity Base Pedestal Medium Basin Large basin Small pedestal Pump Small basin...
Board Fountain Topper Center Pedestal SAFETY PRECAUTIONS This fountain is intended for outdoor use only. Place your fountain in a location where any water spills or splashing will not reach any other electrical equipment or cause damage. Choose an appropriate location before installing the fountain. DO NOT lift or push/drag the water basin to relocate the fountain when it’s filled with water.
Page 3
2. If the water does not flow out of the fountain, it may be caused by kinked or loose water tubes, make sure water tubes are connected properly. ASSEMBLY PICTURES Fig 1 Fig 2 Fig 3 Fig4 Fig5 Fig 6 Fig7 Fig 8 Fig 9...
Page 4
ASSEMBLY INSTRUCTIONS Step 1: Place the base pedestal (A) and the large basin (B) on a level surface.(pls refer to fig .1) Step 2: Route the pump (C)’s power cord downwards through the resin tube in large basin (B). Lay the pump (C) in the bottom of the large basin (B).And then route the pump (C)’s power cord through the base pedestal (A), the cord exits through the slot in the bottom of base pedestal (A).(pls refer to the fig.
Need help?
Do you have a question about the LZH-087 and is the answer not in the manual?
Questions and answers