Sunnydaze Decor GRECIAN FWD-419 Manual

TIERED OUTDOOR WATER FOUNTAIN
Read assembly instructions carefully and follow the care instructions. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
10
10
9
10
2
11

HELPFUL HINTS

When first plugged in, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
Additional water may need to be added after the pump begins to circulate water through the fountain.
FD50065
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
GRECIAN COLUMN
Fountain Topper
Top Tier
7
Small Column
Middle Tier
Large Column
Large Tier
8
Pedestal
Electric Submersible Pump
Rubber Cap
Pump Access Cover
6
String Rocks

ASSEMBLY

1. Align the large tier with the notches in the pedestal and twist the tier
clockwise to lock in place.
5
2. Place the electric submersible pump in the bottom tier. Run the pump
power cord through the built-in pipe in the large tier and out through the
bottom of the pedestal.
3. Ensure the pump sits flat in the large tier, next to the tube. Place the rubber
4
cap over the tube and pump power cord.
4. Place the large column on the large tier, twist the column clockwise to lock
3
in place.
5. Place the middle tier onto the large column, twist the middle tier clockwise
to lock in place.
1
6. Place the small column on the middle tier, twist clockwise to lock in place.
7. Run the built-in water tube from the topper through the top tier, then into
the assembled columns and tiers.
8. Carefully place the top components onto the small column, twist the top
tier clockwise to lock in place.
9. Connect the water tube to the pump and install the pump access cover.
10. Fill all tiers with enough water to keep the pump fully submerged during
operation, approximately 6.5 gallons.
11. Plug the power cord into a properly grounded GFCI outlet.
/ / Order/Customer Reference Number:
FWD-419

Parts

Qty.
1
11/2021
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
1
Inspect packaging to ensure all
1
parts are accounted for before
disposing of packing materials.
1
1
1
1
The water tube is built into
NOTE:
1
the fountain topper. Take care when
1
handling the water tube; detaching
1
the water tube from the fountain will
1
damage the fountain and void the
product warranty.
SET
Page 1 / 2