Sunnydaze Decor FWD-433 Manual

TIERED OUTDOOR WATER FOUNTAIN
Read assembly instructions carefully and follow the care instructions. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.

HELPFUL HINTS

When first plugged in, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
Additional water may need to be added after the pump begins to circulate water through the fountain.
FD50071
Purchase Date: /
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
FRENCH GARDEN
FWD-433
Fountain Topper
Top Tier
Column
Bottom Tier
Pedestal
Electric Submersible Pump
Rubber Cap
Pump Access Cover
String Rocks

ASSEMBLY

1. Align the bottom tier with the grooves in the pedestal and twist
the tier clockwise to lock in place.
2. Place the electric submersible pump in the bottom tier.
pump power cord through the built-in tube in the bottom tier, through
the pedestal and under the groove in the bottom of the pedestal.
3. Ensure the pump sits flat next to the tube in the bottom tier.
Place the rubber cap over the tube and the pump power cord.
4. Place the column on the large tier and twist the column
clockwise to lock in place.
5. Run the built-in water tube from the topper through the top tier.
6. Carefully holding the topper and top tier, place the top tier onto
the column and twist top tier clockwise to lock in place.
7. Firmly connect the water tube to the pump and install the pump
access cover.
8. Fill all tiers with enough water to keep the pump fully
submerged during operation, approximately 5.5 gallons.
9. Plug the power cord into a properly grounded GFCI outlet.
11/2021
/ Order/Customer Reference Number:
Parts Qty.
1
1
1
1
1
1
1
1
1
SET
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
NOTE:
The water tube is built into
the fountain topper. Take care when
handling the water tube; detaching
the water tube from the fountain will
damage the fountain and void the
product warranty.
Run the
Page 1 / 2