Advertisement
Table of Contents
OUTDOOR WATER FOUNTAIN
Read assembly instructions carefully and follow the care instructions. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
ASSEMBLY
1. Locate the light cables inside the fountain and firmly connect them to the splitter on the light cable.
2. Firmly connect the adapter to the light cable.
3. Connect water tube (pre-assembled inside the fountain) to the pump and place the pump inside the fountain.
4. Fill the fountain with enough water to keep the pump fully submerged during operation, approximately
3.5 gallons.
5. Plug both power cords into a properly grounded GFCI outlet.
HELPFUL HINT
When first plugged in, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
FD50038
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
CAVERN OF MYSTERY
FWD-471
Parts
Fountain
Light Cable
Electric Submersible Pump
Rubber Cap
AC Adapter
/
/
Order/Customer Reference Number:
NOTE:
The water tube is built into the fountain. Take
Qty.
care when handling the water tube; detaching the water
1
tube from the fountain will damage the fountain and void
1
the product warranty.
1
1
1
11/2021
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Sponge-like polyurethane foam
filters help control water flow
and prevent splashing ― do not
remove these guards as doing
so may result in splashing and/
or leaking.
Page 1 / 2
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor CAVERN OF MYSTERY
Summary of Contents for Sunnydaze Decor CAVERN OF MYSTERY
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 TROUBLESHOOTING • Ensure that the pump is fully submerged and add water if necessary. • If water is not flowing within several moments of the fountain being plugged in, the pump may have trapped air which can prevent water from circulating properly. Simply unplug the power supply for a few moments and plug it back in.
Need help?
Do you have a question about the CAVERN OF MYSTERY and is the answer not in the manual?
Questions and answers