Sunnydaze Decor FC-73650 Manual

4 - TIER PINEAPPLE OUTDOOR WATER FOUNTAIN
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Note: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
Additional water will need to be added once the pump circulates water into the upper tiers.
73650
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
FC-73650
Read the assembly instructions carefully and follow the care instructions.
Keep these instructions for future reference.
Select a smooth, level surface to place the fountain.
Fountain Topper
Second Tier
Third Tier
Column
Bottom Tier
Pedestal
Electric Submersible Pump
Pump Access Cover
The water tube is built into the fountain topper. Gently and carefully
NOTE:
uncoil the water tube from inside the topper. Take care when handling the
water tube; detaching the water tube from the fountain will damage the
fountain and void the product warranty.
ASSEMBLY
1. Place the bottom tier onto the pedestal, twist to lock them together.
2. Place the electric submersible pump in the bottom tier and run the
power cord through the built-in pipe and out the bottom of the pedestal.
3. Place the column on the bottom tier, twist to lock them together.
4. Place the third tier on the column, twist to lock them together.
5. Run the built-in water tube from the topper through the second tier,
twist to lock the topper onto the second tier.
6. Run the water tube from Step 5 through the third tier, twist to lock the
top assembly to the third tier.
7. Connect the water tube to the pump and install the pump access cover.
8. Fill the bottom tier with enough water to fully submerge the pump.
NOTE:
water into the upper tiers.
9. Plug the power cord into a properly grounded GFCI outlet.
/ / Order/Customer Reference Number:
Parts Qty.
1
1
1
1
1
1
1
1
Additional water will need to be added once the pump circulates
10/2020
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
2-PERSON ASSEMBLY
RECOMMENDED
Page 1 / 2