Polycom PathNavigator Release Note page 3

Field
CallID
ConferenceID
Dial string
Modified dial string
Terminate party
Terminate reason
Q850 Code
Source IP
Destination IP
Source H.323ID
Destination H.323ID
Source E164
Destination E164
Q850 Codes
# Code Description
1 Unassigned Number
2 No Route To Network
3 No Route to Destination
4 Send Special Info Tone
5 Misdialed Trunk Prefix
6 Channel Unacceptable
7 Call Awarded Delivery in Established Channel
8 Preemption
9 Circuit Reserved for Use
16 Normal
17 User Busy
18 User Not Responding
19 No Answer From User
20 Subscriber Absent
21 Call Rejected
22 Number Changed
26 Non Selected User Clearing
27 Destination Out of Order
28 Invalid Number Format
29 Facility Rejected
30 Response To Status Enquiry
31 Normal Unspecified
Copyright (c) 2004 Polycom Incorporated. All rights reserved.
Polycom, the Polycom logo design and ViewStation are registered trademarks, PathNavigator, Global Management System, and
iPower are trademarks of Polycom, Inc. in the United States and various other countries. All other trademarks are the property of
respective owners
Description
Global unique identifier of call
Global unique identifier of call. If call is
a point to point, conference ID and call
ID are two different numbers
What was dialed by the caller
This is the dial string modified by
PathNavigator with the proper codes
that is sent to either an MCU or a
Gateway.
This which side (source or destination or
unknown) ended the call.
The states are normal, abnormal or
unknown. The states are determined by
the disconnect message sent to
PathNavigator.
Q.850 reason for disconnect. Please
refer to the table below to interpret
code.
IP Address of source endpoint
IP Address of destination endpoint
H.323 ID of source endpoint
H.323 ID of source endpoint
E.164 alias of source endpoint
E.164 alias of destination endpoint
3