Logging Into Pathnavigator - Polycom PathNavigator Release Note

L I P
OGGING NTO ATH
To login to your PathNavigator, perform the following steps:
1. Log in to your PathNavigator in a web browser by entering the following address:
http://<systemname>/pathnavigator
or
http://<system_ip_address>/pathnavigator
Where <systemname> is the name of the server that PathNavigator is loaded on,
and <system_ip_address> is the IP address of the server that PathNavigator is
loaded on.
2. Enter admin in the Login field. If this is the first time accessing the application,
leave the password field blank.
3. You will now be prompted for a password to be set.
Note: After logging in for the first time, the user will be forced to change the password
from a blank password to a password containing up to 10 characters. This password will
be used for all subsequent logins unless changed in the Configuration > User
Administration section in PathNavigator.
The password is also case sensitive.
Copyright (c) 2004 Polycom Incorporated. All rights reserved.
Polycom, the Polycom logo design and ViewStation are registered trademarks, PathNavigator, Global Management System, and
iPower are trademarks of Polycom, Inc. in the United States and various other countries. All other trademarks are the property of
respective owners
N
AVIGATOR
11