Error Messages And Troubleshooting - Omron BP6100 Instruction Manual

6. Error Messages and Troubleshooting

In case of any of the below problems occur during measurement, first check that no
other electrical device is within 12 inches (30 cm). If the problem persists, please
refer to the table below.
Display/Problem
appears or the wrist
cuff does not inflate.
appears
appears
appears
/
appears
appears
Possible Cause
The wrist cuff is not applied
correctly.
Air is leaking from the wrist
cuff.
The wrist cuff is overinflated
exceeding 300 mmHg.
You move or talk during a
measurement. Vibrations
disrupt a measurement.
The pulse rate is not
detected correctly.
Apply the wrist cuff correctly,
then take another
measurement. Refer to
section 2.4.
Contact customer service.
Refer to chapter 10.
Do not touch the wrist cuff
while taking a measurement.
Remain still and do not talk
during a measurement.
Apply the wrist cuff correctly,
then take another
measurement. Refer to
section 2.4.
Remain still and sit correctly
during a measurement.
If the "
continues to appear, we
recommend you to consult
with your physician.
26
Solution
" symbol