Sunnydaze Decor WNC-375 Manual

CHILDREN PLAYING AT FAUCET
Read the assembly instructions carefully and follow the care instructions. Keep this manual for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
3
2
1

ASSEMBLY

1. From the access hole in the back of the fountain, locate the built-in water tube and light cable. Firmly attach the short
cable on the pump to the light cable.
2. Attach the pump to the water tube. Place the pump inside the fountain and run the power cord out the access hole.
TIP: Familiarize yourself with the pump. Water flow is controlled by a switch on the front of the pump. Moving the switch
to (+) increases water flow, (-) decreases water flow.
3. Firmly attach the AC adapter to power cord.
4. Place the solar lamp onto the top of the fountain. Refer to solar panel operation, page 2.
5. Hang the welcome sign on the sign post chains.
6. Use a bucket or watering can to fill the fountain with enough clean water to keep the pump fully submerged during
operation, approximately 1.25" below the edge of the basin.
7. Plug the power cord into a properly grounded GFCI outlet.
Note: When first used, there may be air trapped in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
WXF02915
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
OUTDOOR WATER FOUNTAIN
WITH SOLAR LAMP POST
Select a smooth, level surface to place the fountain.
Parts
Fountain
Solar Lamp
Welcome Sign
Electric Submersible Pump
AC Adapter
4
/ / Order/Customer Reference Number:
WNC-375
Qty.
1
1
1
1
Rattling noise inside the fountain? Due to the casting
process, there may be loose pieces of the casting material inside the
1
fountain. Simply remove loose casting material before use.
5
11/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
NOTE: The water tubing is built into the fountain.
Take care when handling the water tube; detaching
the water tube from the fountain will damage the
fountain and void the product warranty.
6
7
Page 1 / 3