Advertisement
Table of Contents
Warning
•
Keep fountain out of reach of children.
•
Use proper power source as indicated on water pump label.
•
Keep electrical cords away from all heat sources. D not place electrical cords in high temperatures.
•
Check water level at pump location regularly, avoid damage the pump must be fully submerged.
Parts:
1. Pump with tubing- 1 pc
2. Fountain Body-1 pc
3. Transformer- 1 pc
4. Back door to fountain- 1 pc
Assembly:
1. Connect pump with tubing and
place into fountain via the back
opening.
2. Connect transformer to pump,
leave outside of the fountain, do
not get wet.
3. Add water, and insert the back
door of the fountain.
4. Plug in pump.
Troubleshooting:
Pump operates but no water flow: Make sure pump is fully submerged in water. If there is still no water flow, please
turn pump on then off several times.
Water speed: Adjust the switch control located on the pump housing.
Noise from pump/Fountain: Make sure pump is fully submerged in water.
QC-862
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sunnydaze Decor QC-862
Summary of Contents for Sunnydaze Decor QC-862
- Page 1 QC-862 Warning • Keep fountain out of reach of children. • Use proper power source as indicated on water pump label. • Keep electrical cords away from all heat sources. D not place electrical cords in high temperatures. • Check water level at pump location regularly, avoid damage the pump must be fully submerged.
- Page 2 (Optional) Light does not shimmer: Check the light bulb to make sure that it is connected to socket.
Need help?
Do you have a question about the QC-862 and is the answer not in the manual?
Questions and answers