Sunnydaze Decor SPQ0796 Instructions

1. Locate the base in the desire location.Add water to the level indicated in. (Fig.1)
2. A.Insert the pump into the basin and connect the pump with hose.
B. Connect the connecters of transformer.
C.Put the fountain body on the basin.(Fig.2)
3. A.Put in rubble stones on top of basin.
B.Plug the power cord into an outlet.(Fig.3)

TROUBLESHOOTING

Pump operates, but no water flow:
Water speed:
Noise from fountain:
Light does not shimmer:
Thank you for choosing Sunydaze Décor. If you have any questions,
comments or concerns please feel free to contact us by phone at:
888-881-4668,by email:customerservice@serenityhealth.com,or you
could also email us via our contact us page at:
WWW.SerenityHealth.com/contact-us/.
We stand behind our brand and the quality of the items we sell. We will
send new parts, or replace products at our discretion within the one year
warranty period. Before we can help ,you will need to provide proof of
purchase with the date of purchase and photos of the defective
merchandise. We will use the photos to determine the cause of defect
and for future quality control.
Slate Fountain Instruction
Item#:SPQ0796

Warning and Safety Concerns

* The pump and halogen light are tested and approved for indoor use only.
* Keep fountain out of reach of children.
* Use proper power source as indicated on water pump label.
* Keep electrical cords away from all heat sources.Do not place electrical cords
in high temperatures.
* Check water level at pump location regularly.To avoid damage the pump must
be fully submerged.

PARTS LIST

A: Fountain Body 1PC
B: Basin 1PC
Pump 1PC
C
Transform 1PC
D
E: Pebbles 1BAG

ASSEMBLY INSTRUCTIONS

:
* Make sure pump is fully submerged in water. If there is still no water flow
please turn off the power of the transformer,repeat this step several times.
* To change the water speed,simply adjust the switch control located on
the pump housing.
* Check water level and make sure the pump is completely submerged
* Check the light bulb and make sure it is connected to socket.
Fig.1 Fig.2
Fig.3