TABLETOP WATER FOUNTAIN
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.
Ensure all parts are
accounted for before
disposing of packaging.
1. Locate the water tube that is built into the fountain and firmly attach the pump. Place the pump inside the
fountain, run the power cord out the back of the fountain.
2. Fill the base with enough water to keep the pump fully submerged during operation, approximately 2 cups.
3. Plug the power cord into a properly grounded GFCI outlet.
NOTE: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
MZ13709BA
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
CASCADING SIDE TIERS
INDOOR CERAMIC
Assemble components on a soft, clean surface to avoid damaging the finish.
Parts
Fountain
Electric Submersible Pump
ASSEMBLY
Refer to page 2 for more troubleshooting tips.
/
/
Order/Customer Reference Number:
SSS-633
NOTE: The water tubing is built into the fountain. Take
Qty.
care when handling the water tube; detaching the water
1
tube from the fountain will damage the fountain and
automatically void the product warranty.
1
No water sounds
04/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Page 1 / 2
Need help?
Do you have a question about the SSS-633 and is the answer not in the manual?
Questions and answers