Course Pointer; Navigating With Sight 'N Go; Compass Settings - Garmin GPSMAP 67 Owner's Manual

Course Pointer

The course pointer is most useful when you are navigating on water or where there are no major obstacles in
your path. It can also help you avoid hazards near the course, such as shoals or submerged rocks.
To enable the course pointer, from the compass, select MENU > Setup Heading > Go To Line (Pointer) > Course
(CDI).
The course pointer indicates your relationship to the course line leading to the destination. The course
deviation indicator (CDI)
the distance between dots

Navigating with Sight 'N Go

You can point the device at an object in the distance, lock in the direction, and navigate to the object.
1 Select Sight 'N Go.
2 Point the device at an object.
3 Select Lock Direction > Set Course.
4 Navigate using the compass.

Compass Settings

From the compass, select MENU.
Sight 'N Go: Allows you to point the device at an object in the distance, and navigate using the object as a
reference point (Navigating with Sight 'N Go,
Stop Navigation: Stops navigating the current route.
Change Dashboard: Changes the theme and information displayed on the dashboard.
Set Scale: Sets the scale for the distance between the dots on the course deviation indicator.
Calibrate Compass: Allows you to calibrate the compass if you experience irregular compass behavior, for
example, after moving long distances or after extreme temperature changes
page 8).
Setup Heading: Allows you to customize the compass heading settings
Change Data Fields: Customizes the compass data fields.
Restore Defaults: Restores the compass to factory default settings.
Using the Main Pages
provides the indication of drift (right or left) from the course. The scale
on the course deviation indicator, which tell you how far off course you are.
page 7).
(Calibrating the Compass,
(Heading Settings, page 8).
refers to
7