Setting A Waypoint Proximity Alarm; Adding A Waypoint To A Route; Repositioning A Waypoint To Your Current Location; Routes - Garmin GPSMAP 67 Owner's Manual

Setting a Waypoint Proximity Alarm

You can add a proximity alarm for a waypoint. Proximity alarms alert you when you are within a specified range
of a particular location.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Set Proximity.
4 Enter the radius.
When you enter an area with a proximity alarm, the device sounds a tone.

Adding a Waypoint to a Route

1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Add to Route.
4 Select a route.

Repositioning a Waypoint to Your Current Location

You can change the position of a waypoint. For example, if you move your vehicle, you can change the location
to your current position.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Reposition Here.
The waypoint location changes to your current location.

Routes

A route is a sequence of waypoints or locations that leads you to your final destination. Routes are saved as
GPX files on the device.

Creating a Route

1 Select Route Planner > Create Route > Select First Point.
2 Select a category.
3 Select the first point in the route.
4 Select Use.
5 Select Select Next Point to add additional points to the route.
6 Select QUIT to save the route.

Navigating a Saved Route

1 Press FIND.
2 Select Routes.
3 Select a route.
4 Select Go.
By default, your route appears as a straight, colored line on the map.

Viewing the Active Route

1 While navigating a route, select Active Route.
2 Select a point in the route to view additional details.
12 Navigation