Image Level Adjustment - Canon LV-S4 Owner's Manual

Computer Input

Image Level Adjustment

1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Image Adjust Menu icon.
2 Press the Point
the item that you want to adjust, and then press the OK
button. The level of each item is displayed. Adjust each
level by pressing the Point
Contrast
Press the Point 7 button to decrease contrast and the Point
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust image darker and the Point
button to adjust image brighter. (From 0 to 63.)
Color temp.
Press the Point button or the Point
7
level that you want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point 7
button to deepen red tone. (From 0 to 63.)
White balance (Green)
Press the Point 7 button to lighten green tone and the Point
button to deepen green tone. (From 0 to 63.)
White balance (Blue)
Press the Point button to lighten blue tone and the Point
7
button to deepen blue tone. (From 0 to 63.)
Gamma
Press the Point
7 8
(From 0 to 15.)
Reset
To reset the adjusted data, select Reset and press the OK button.
The confirmation box will appear and then select [Yes]. All
adjustments return to their previous figures.
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the OK button. The message
"OK?" will appear. Select [Yes] to store manual adjustment.
To set this manual adjustment, select Custom by pressing the
IMAGE button or through the Image Select Menu (p29).
If you change the Image level (p29) without storing the adjusted
data, the figures will go back to the factory default settings.
Quit
Close the Image Level Adjustment.
✔
Note:
•After adjusting any of the White balance Red, Green or Blue, the Color temp.
will change to "Adj.".
30
7 8 buttons to move the red frame
d d button to move the red frame pointer to
7 8 buttons.
button for Color temp.
8
button to lighten red tone and the Point
buttons to obtain better balance of contrast.
Image Adjust Menu
8
8
8
8
8
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the OK button.
Selected Image Level
Press the Point 7 8 buttons to
adjust value.
Store icon
Press the OK button at this
icon to store the adjustment.
"OK?" message
Move the pointer to [Yes] and
then press the OK button.