Image Adjustment - Canon 2502C016 User Manual

Menu Description

Image adjustment

This section describes image quality settings such as brightness, contrast,
and sharpness.
Menu screen when the input signal is HDMI
Menu
Image mode*
Create profile
Baseline image mode
Brightness*
Contrast*
Sharpness*
Gamma*
HDR range*
Color adjustment*
Advanced adjustment*
Light source mode*
Brightness level*
Reset
Image priority*
Menus that are not available are grayed out or hidden.
* Any adjustments you make are stored for each combination of input signal and
image mode.
Function
Select overall image quality to suit the projected
image.
Save desired image quality settings as profiles.
Shows the image mode that is basis of the profile.
Adjust image brightness.
Adjust image contrast.
Adjust image sharpness.
Correct loss of detail in shadows or highlights.
Within the dynamic range of SMPTE ST 2084, set the
range to use.
Fine-tune image colors.
Fine-tune noise reduction and color tone.
Adjust projection brightness and operating sounds.
Adjust projection brightness as controlled by the drive
current of the laser diode.
Restore default image settings.
Select which side is the basis for image processing in
split-screen mode.
139
Details
P140
P140
P140
P140
P140
P141
P141
P141
P141
P142
P147
P147
P148
P148