Table of Contents
Advertisement
Operation
"
Wash Temp
" button
For best results,follow your garment label instructions and use the
warmest water temperature that is safe for your fabric.
Use this button to select a wash temperature;in any cycle,the cold
Wash
inletvalve is opened.
Temp
Hot: the hot inletvalve is opened for all time during entire inflowing;
Warm: much hot for all time during entire inflowing;
Cool: some hot water is received during;
Cold: little hot water is received during entire inflowing;
Tap Cold: the cold water inletvalve is opened only and no hot water
during entire inflowing.
"Soil Level" button
Use this button to fine tune your wash cycle based on the soil level of
Soil
your laundry. Adjusting this setting will result in longer or shorter wash
Level
time.
"Spin Speed" button
A spin speed setting will automatically be selected with the wash cycle.
Spin
Use this button to change the default setting.
Speed
Not all selections are available for all cycles.
"Wash Option" button
Pre Soak
The pre-soak indicator will light when pre-soak is selected, and it will add additional time
depending on the soil level selection.
Wash
Extra Rinse
Option
Use this button to select or deselect the extra rinse option.
NOTE:The whites cycle automatically selects the extra rinse option.
Fabric softener
Turn this feature on when using the fabric softener dispenser. This will ensure that the selected
wash cycle is optimized for a rinse additive. At the start of the final rinse,fabric softener will be
released into the wash load as the disperser is flushed with water.
13
Advertisement
Table of Contents
