Table of Contents
Advertisement
Operation
"Water Level" button
The washing machine can detect the laundries automatically.After
detection,it will set the water level to suitable value automatically.You can
also set water level by yourself.After the machine is started,it will not set
water level automatically.You shall puse the Start/Hold Button to make
Water
new setting.
Level
During operation of sock,wash and rinse program,you can push down the
water level button to add water.When you release the button,or it reaches
the button,or it reaches the overflow water level,the machine will stop
adding water.
The water level decided may be different from actual value because of
the different moisture level of the lanudries.
"Inner Lighting" button
Press the button,the lamp of inner tub is light.
Inner
Press the button again,the lamp of inner tub is closed.
Lighting
"Delay Wash" button
The LED above the button indicates that the Delay Wash feature has
been selected. The Start/Pause must be selected to begin the countdown.
The LED indicator will be lighting during the delay function is operating.
Delay
One button press after 24 hours will cancle the delay wash feature.
Wash
You can also cancel the delay wash feature by turning off power to
the washer with the power button.
The delay wash indicator light on,the delay wash feature has been
selected.The Start/Pause must be selected to begin the countdown.The
delay wash indicator on that the delay function is operating.
"Cycle Signal" button
Use this button to adjust the volume of control of control panel beeps
Cycle
and the end-of setting.
Signal
14
Advertisement
Table of Contents
